Cam & Groove Fittings
4" POLY CAM & GROOVE DUST PLUG-DXNPPDP400 >
2" POLY CAM & GROOVE DUST PLUG-DXNPPDP200 >
1-1/4" POLY CAM & GROOVE DUST PLUG-DXNPPDP125 >
4" POLY CAM & GROOVE DUST CAPS-DXNPPDC400 >
1" POLY CAM & GROOVE DUST CAPS-DXNPPDC100 >
4" POLY CAM & GROOVE COUPLER-DXNPPD400 >
1-1/4" POLY CAM AND GROOVE COUPLER-DXNPPA125>
Kuri Tec® PPDP300 PPDP Part D Coupling, 3 in Nominal, Dust Plug End Style, Polypropylene, Import
Kuri Tec® PPDP300 PPDP Part D Coupling, 3 in Nominal, Dust Plug End Style, Polypropylene, Import
Kuri Tec® PPDP100 PPDP Part D Coupling, 1 in Nominal, Dust Plug End Style, Polypropylene, Import
Kuri Tec® PPDP100 PPDP Part D Coupling, 1 in Nominal, Dust Plug End Style, Polypropylene, Import
Kuri Tec® PPDC300 PPDC Dust Cap, 3 in Nominal, Dust Cap End Style, Polypropylene, Domestic
Kuri Tec® PPDC300 PPDC Dust Cap, 3 in Nominal, Dust Cap End Style, Polypropylene, Domestic
Kuri Tec® PPA125 Part A Coupling, 1-1/4 in Nominal, Male Adapter x Female NPT End Style, Polypropylene, Import
Kuri Tec® PPA125 Part A Coupling, 1-1/4 in Nominal, Male Adapter x Female NPT End Style, Polypropylene, Import
Kuri Tec® PPA100 Part A Coupling, 1 in Nominal, Male Adapter x Female NPT End Style, Polypropylene, Import
Kuri Tec® PPA100 Part A Coupling, 1 in Nominal, Male Adapter x Female NPT End Style, Polypropylene, Import
Kuri Tec® AL-E050 AL-E Part E Coupling, 1/2 in Nominal, Male Adapter x Hose Shank End Style, Aluminum, Import
Kuri Tec® AL-E050 AL-E Part E Coupling, 1/2 in Nominal, Male Adapter x Hose Shank End Style, Aluminum, Import
Kuri Tec® AL-DP050 AL-DP Dust Plug, 1/2 in Nominal, Aluminum, Import
Kuri Tec® AL-B050 AL-B Part B Coupling, 1/2 x 1/2 in Nominal, Female Coupler x MNPT End Style, Aluminum, Import
Kuri Tec® AL-B050 AL-B Part B Coupling, 1/2 x 1/2 in Nominal, Female Coupler x MNPT End Style, Aluminum, Import
HCI Preferred Supplier PPF-75 Cam and Groove Fitting, 3/4 in Nominal, Adapter x MNPT End Style, Polypropylene
HCI Preferred Supplier 35961 Cam and Groove Fitting, 3/4 in Nominal, Adapter x MNPT End Style, Polypropylene
HCI Preferred Supplier PPF-150 Cam and Groove Fitting, 1-1/2 in Nominal, Adapter x MNPT End Style, Polypropylene
Kuri Tec® PPF150 Part F Coupling, 1-1/2 in Nominal, Male Adapter x Male NPT End Style, Polypropylene, Domestic
HCI Preferred Supplier PPF-100 Cam and Groove Fitting, 1 in Nominal, Adapter x MNPT End Style, Polypropylene
HCI Preferred Supplier 35962 Cam and Groove Fitting, 1 in Nominal, Adapter x MNPT End Style, Polypropylene
HCI Preferred Supplier PPE-75 Cam and Groove Fitting, 3/4 in Nominal, Adapter x Hose Shank End Style, Polypropylene
HCI Preferred Supplier 35951 Cam and Groove Fitting, 3/4 in Nominal, Adapter x Hose Shank End Style, Polypropylene
HCI Preferred Supplier PPE-300 Cam and Groove Fitting, 3 in Nominal, Adapter x Hose Shank End Style, Polypropylene
Kuri Tec® PPE300 PPE Part E Coupling, 3 in Nominal, Male Adapter x Hose Shank End Style, Polypropylene, Import
HCI Preferred Supplier PPE-200 Cam and Groove Fitting, 2-1/2 in Nominal, Adapter x Hose Shank End Style, Polypropylene
Kuri Tec® PPE200 PPE Coupling, 2 in Nominal, Male Adapter x Hose Shank End Style, Polypropylene, Import
HCI Preferred Supplier PPD-75 Cam and Groove Fitting, 3/4 in Nominal, Female Coupler x MNPT End Style, Polypropylene
HCI Preferred Supplier 35921 Cam and Groove Fitting, 3/4 in Nominal, Female Coupler x MNPT End Style, Polypropylene
HCI Preferred Supplier PPD-200 Cam and Groove Fitting, 2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
HCI Preferred Supplier 35945 Cam and Groove Fitting, 2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
HCI Preferred Supplier PPC-300 35-93X Cam and Groove Coupler, 3 in Nominal, Hose Shank x Female Coupler End Style, Polypropylene
HCI Preferred Supplier CGC-300-PP 35-93X Cam and Groove Coupler, 3 in Nominal, Hose Shank x Female Coupler End Style, Polypropylene
Recently Viewed
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
Morse 20:1 RAIDER WORM GEAR REDUCERS BRW 325-Q-140-LR-20
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Browning® Classical Gripbelt® 1042506 BK Series Type 2 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
1:1 RATIO PUMP-GRC237134 >
Coilhose® 600-ST Blow Gun, Safety Tip, 150 psi Working, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Import
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).
Coilhose® 600-SS Blow Gun, Safety Tip, 150 psi Working, 1/4 in FNPT Inlet x 1/8 in FNPT Outlet Thread, Die Cast Zinc, Import
The 600 series blow guns are a thumb lever style blow gun with an ergonomic shape and accept all Coilhose® 1/8 in tips. User comfort was designed into the 600 series with the elimination of the valve where the user's fingers are placed. Models that are designated as "safety" conform to OSHA standards for noise levels (1910.95) and 30 psi dead end pressure (1910.242B).