Pneumatic Quick Connect Fittings
Parker 3/8" HOSE BARB QUICK COUPLER PLUGS PAR H-5-E
Parker® H5E Industrial Interchange General Purpose Straight Through Quick Disconnect Nipple, 3/8 in, Quick Connect Coupler x Hose Barb, 300 psi, Steel, Domestic
Milton® 775BK 700 A-Style ARO 210 Interchange Coupler, 1/4 in, FNPT, 300 psi, Steel, Domestic
1/4 in FNPT A-style push type Coupler are easy to use simply push plug into Coupler to engage, pull sleeve back to remove. Made of plated steel to resist rust, these Couplers have a maximum inlet pressure of 300 psi. A-style Couplers have a basic flow size of 1/4 in and a maximum air flow of 34 scfm.
Milton s99774 1/4" MNPT A style push button safety couplers are easy to use. Simply push once to stop airflow, twice to release plug. Safety couplers prevent possible injury or damage due to accidental disconnects. OSHA required in certain areas and appli
1/4 in MNPT A-style pushbutton Safety Couplers are easy to use. Simply push once to stop airflow, twice to release plug. Safety Couplers prevent possible injury or damage due to accidental disconnects. OSHA required in certain areas and applications. A-style Safety Couplers have a 1/4 in basic flow size, Maximum inlet pressure of 300 psi and air flow of 36 scfm.
Milton 792 1/4" FEMALE "L" AIR COUPLER PLUGS 1/4" FNPT L style plugs are made of case hardened steel. Maximum working temperature of 300 PSI. Plug is plated to resist rust.
1/4 in MNPT L-style Plugs are case hardened steel plated to resist rust and have a working pressure of up to 300 psi. 1/4 in basic flow size with air flow of 32 scfm. 1/4 in FNPT L-style Plugs are made of case hardened steel. Maximum working temperature of 300 psi. Plug is plated to resist rust.
Milton 791 1/4" MNPT L style plugs are case hardened steel plated to resist rust and have a working pressure of up to 300 PSI. 1/4" basic flow size with air flow of 32 SCFM.
1/4 in MNPT L-style Plugs are case hardened steel plated to resist rust and have a working pressure of up to 300 psi. 1/4 in basic flow size with air flow of 32 scfm.
Milton 787 1/4" FNPT T style sleeve ring body couplers have a 1/4" basic flow size and a maximum inlet pressure of 300 PSI. These T style couplers with oversized sleeve rings offer air flow of up to 40 SCFM.
1/4 in FNPT T-style sleeve ring body Couplers have a 1/4 in basic flow size and a maximum inlet pressure of 300 psi. These T-style Couplers with oversized sleeve rings offer air flow of up to 40 scfm.
Milton 786 1/4" MNPT T style couplers have a brass body and a Buna-N seal. Milton T style couplers have a 1/4" basic flow size and a maximum of 300 PSI. Offers air flow of up to 40 SCFM.
1/4 in MNPT T-style Couplers have a brass body and a Buna-N seal. Milton® T-style Couplers have a 1/4 in basic flow size and a maximum of 300 psi. Offers air flow of up to 40 scfm.
Milton 785 1/4" NPT, Female, T Style, Coupler, Made Of Case Hardened Steel To Resist Rust, 300 PSI, Air Flow Of 40 Standard CUFT Per Minute, Maximum Temperature Of 250 Degrees Fahrenheit, Industrial Application. Questions & Answers
HCI Preferred Supplier 28507S Automotive/Parker Interchange Quick-Disconnect Coupler, 1/4 in Nominal, FNPT, 300 psi Pressure, Steel
Milton 784 1/4" FNPT T style plugs are made of case hardened steel and plated to resist rust. T Style plugs are perfect for industrial applications and offer a 1/4" basic flow size. T style plugs have a maximum inlet pressure of 300 PSI and air flow of 40
1/4 in MNPT T-style Plugs are made of case hardened steel and are plated to resist rust. T-style Plugs have a 1/4 in basic flow size with maximum pressure of 300 psi. With air flow of 40 scfm, Milton® T-style Plugs are ideal for industrial applications. 1/4 in FNPT T-style Plugs are made of case hardened steel and plated to resist rust. T-style Plugs are perfect for industrial applications and offer a 1/4 in basic flow size. T-style Plugs have a maximum inlet pressure of 300 psi and air flow of 40 scfm.
Milton 778 1/4" Female Pllug "A" AIR COUPLERS 1/4" FNPT A style plugs are made of case hardened steel and plated to resist rust. Maximum inlet pressure of 300 PSI. Has a push type sleeve release.
1/4 in MNPT A-style push type Coupler is a push type Coupler simply push plug into Coupler to engage, pull sleeve back to remove. Steel is plated to resist rust. Accepts the following Milton® A-style plugs - #778, #777, #777-4, #777-6, #1777-4 and #1777-6.1/4 in FNPT A-style plugs are made of case hardened steel and plated to resist rust. Maximum inlet pressure of 300 psi. Has a push type sleeve release.
Milton 777 1/4" MNPT A style plugs are case hardened steel and plated to resist rust. A style plugs have a maximum pressure of 300 PSI and a basic flow size of 1/4".
1/4 in MNPT A-style Plugs are case hardened steel and plated to resist rust. A-style Plugs have a maximum pressure of 300 psi and a basic flow size of 1/4 in.
Milton 736 M style plug has a 1/4" hose barb which makes this the ideal plug for hose repair or assembling custom lengths. M style plugs have a 1/4" basic flow size and offer up to 300 PSI. Air flow of 40 SCFM.
M-Style® plug has a 1/4 in hose barb which makes this the ideal plug for hose repair or assembling custom lengths. M-Style® plugs have a 1/4 in basic flow size and offer up to 300 psi. Air flow of 40 scfm.
Milton 733 3/8" MNPT industry standard M style plug has a 1/4" basic flow size and a maximum inlet pressure of 300 PSI. Has an air flow of 40 SCFM.
3/8 in MNPT industry standard M-Style® Plug has a 1/4 in basic flow size and a maximum inlet pressure of 300 psi. Has an air flow of 40 scfm.
Milton 728 1/4" FNPT M style plugs have a 1/4" basic flow size and air flow of 40 SCFM. Made of case hardened steel and plated to resist rust, M style plugs have a maximum pressure of 300 PSI.
1/4 in FNPT M-Style® Plugs have a 1/4 in basic flow size and air flow of 40 scfm. Made of case hardened steel and plated to resist rust, M-Style® Plugs have a maximum pressure of 300 psi.
Milton 727 1/4" M style MNPT plugs are the industry standard style plugs. These steel plugs have a 1/4" basic flow size, maximum air flow of 40 SCFM and a maximum inlet pressure of 300 PSI.
1/4 in M-Style® MNPT Plugs are the industry standard-style Plugs. These steel Plugs have a 1/4 in basic flow size, maximum air flow of 40 scfm and a maximum inlet pressure of 300 psi.
Milton 726 1/8" male national pipe thread Maximum pressure of 300 pounds per square inch Air flow of 40 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit
1/8 in MNPT M-Style® Plugs have a 1/4 in basic flow size and a maximum pressure of 300 psi. The industry standard M-Style® couplers come with a Buna-N seal and air flow of 40 scfm. M-Style® Plugs are made of case hardened steel and are plated to resist rust.
Milton 719 3/8" Male national pipe thread Maximum pressure of 300 pounds per square inch Air flow of 40 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit Kwik change coupler
3/8 in MNPT M-Style® Couplers offer a 1/4 in basic flow size and a maximum pressure of 300 psi. The industry standard M-Style® Couplers come with a Buna-N seal. Air flow of 40 scfm.
Milton 718 Female adapter Maximum of 300 pounds per square inch Air flow of 40 standard cubic feet per minute Maximum recommended temperature of 250 degrees Fahrenheit
3/8 in FNPT M-Style® Couplers have a brass body and a Buna-N seal. The industry standard Milton® M-Style® Coupler has a 1/4 in basic flow size and a maximum pressure of 300 psi. M-Style® Couplers offer air flow of 40 scfm.
Milton 716 1/4" MNPT Male M-Style Air Compressor Quick Connect Fitting Coupler Milton Industries is proud to be the creator and leader of the pneumatic industry standard M-Style air coupler. This 1/4" MNPT M style brass coupler has a 1/4" basic flow size,
Milton Industries is proud to be the creator and leader of the pneumatic industry standard M-Style® Coupler. This 1/4 in MNPT M-Style® brass Coupler has a 1/4 in basic flow size, offering a maximum of 300 psi. Comes with Buna-N seal and air flow of 40 scfm. Both the body and sleeve are made of brass. You can also find this S-716 air Coupler included in these Milton® Coupler/plug and accessory kits: #S-221, S-222, MK1669-1, 683-MCPK. Milton® M-Style® KWIK-CHANGE® Couplers are made of brass, while M-Style® KWIK-CHANGE® plugs are made of case hardened steel and are plated to resist rust.
Milton 715 The industry standard M style coupler 1/4" female national pipe thread Kwik Change couplers will interchange with all manufacturers 40 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit
Milton® (715) 1/4 in FNPT M-Style® KWIK-CHANGE® Coupler. Milton Industries is proud to be the creator and leader of the pneumatic industry standard M-Style® Coupler. This 1/4 in FNPT M-Style® brass Coupler has a 1/4 in basic flow size, offering a maximum of 300 psi. Comes with Buna-N seal and air flow of 40 scfm. Milton® M-Style® KWIK-CHANGE® Couplers are made of brass, while M-Style® KWIK-CHANGE® plugs are made of case hardened steel and are plated to resist rust.
Milton 711 M style coupler and plug kit includes one 1/4" FNPT coupler and one 1/4" MNPT plug. Made up of a brass body, brass sleeve coupler and steel plug. With a 1/4" basic flow size and air flow of 40 SCFM, this coupler and plug combination has a maxim
M-Style® Coupler and Plug Kit includes one 1/4 in FNPT coupler and one 1/4 in MNPT plug. Made up of a brass body, brass sleeve coupler and steel plug. With a 1/4 in basic flow size and air flow of 40 scfm, this coupler and plug combination has a maximum pressure of 300 psi and a Buna-N seal.
Milton 1859 3/8"" MNPT G Style Plug 3/8" male national pipe thread Maximum pressure of 300 pounds per square inch Air flow of 99 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit
Coilhose® 1203 Coilflow Manual Industrial Type 12 Manual Industrial Hose Connector, 1/2 x 3/8 in Nominal, Quick Connect Coupler x MNPT, 300 psi Pressure, Steel, Domestic
Milton 1840 1/4" FNPT H style plugs are made of case hardened steel and plated to resist rust. H style plugs offer a basic flow size of 3/8" and maximum pressure of 300 PSI. Air flow of 67 SCFM is perfect for all of your larger tool applications requiring
1/4 in FNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs offer a basic flow size of 3/8 in and maximum pressure of 300 psi. Air flow of 67 scfm is perfect for all of your larger tool applications requiring more scfm.
Milton 1837 3/8" MNPT H Style Plug Air flow of 67 standard cubic feet per minute Maximum temperature of 250 degrees Fahrenheit 3/8" Male national pipe thread Maximum inlet pressure of 300 pounds per square inch
3/8 in MNPT H-style Plugs are made of case hardened steel and plated to resist rust. H-style Plugs have a basic air flow size of 3/8 in and a maximum inlet pressure of 300 psi. These Plugs are perfect for larger tool applications requiring more scfm.
Recently Viewed
WATTS® 0066100 100XL Self-Closing Temperature/Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, Brass Body
This 3/4 inch temperature and pressure relief valve is used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. This valve is ASME rated and CSA listed. Temperature relief is 210 degree F (99 degree C). Pressure relief is set at 150 psi.
5203-AA/SY FILMOP SWEEPER DUST MOPS
72" V-SWEEPER DUST MOP-MAG5203AA/SY>
Browning® 1212018 Minimum Plain Bore Spur Gear, 10 Diametral Pitch, 14.5 deg, 1 in W Face, 40 Teeth, 4 in Dia Pitch, 7/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
These unground flanged ball bearings have very low precision tolerance levels. The are suitable for applications that do not require high precision movement
MCR Safety NXG® Work Gloves 13 Gauge White Polyester Shell White Polyurethane (PU) Palm and Fingertips NXG provides Premium quality, comfort and fit making it the best choice for long work days The next generation of gloves requires the next generation in manufacturing. MCR Safety’s state-of-the-art manufacturing facility produces premium NXG® brand gloves with advanced coatings, utilizes 21st-century manufacturing efficiencies, and does so with environmentally friendly production methods. Our NXG® styles are well suited for Multi-Industrial applications that require high dexterity and comfort and are manufactured on seamless knit liners that are flat dipped to reproduce the natural curved shape of the hand. As a result, workers benefit from less hand fatigue and greater productivity while performing detailed tasks to heavy duty jobs. The 96655 features a seamless 13 gauge white polyester shell and white polyurethane (PU) coated palm and fingertips that will enhance gripping power. Made with no silicone. If you are looking for the best work gloves, be sure to check out MCR Safety's NXG® options! To learn more, visit our NXG® landing page here.
Southwire® 9858SW0008 Type SJEO Power Supply Cord, 125 V AC, (3) 14 AWG Copper Conductor, 9 ft L
Southwire® 9858SW0008 Type SJEO Power Supply Cord, 125 VAC, (3) 14 AWG Copper Conductor, 9 ft L
