NIBCO 1-1/2" SCH-40 PVC 90-DEG STR/ELBOW NIB 409-015
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
-
BrandLasco®
-
UPC025528718152
-
Manufacturer Part Number409-015
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector Type90 deg Elbow
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size1-1/2 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
End StyleSpigot x Slip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2466: Socket type poly vinyl chloride (PVC) plastic pipe fittings, SCH 40/STD
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172808
-
Package Description25/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
-
Catalog
Recently Viewed
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
Browning® Gearbelt® 1054865 Type 2 Synchronous Timing Pulley With Flange, 1/4 to 1/4 in Bore, 0.871 in OD, 14 Grooves, 0.891 in Dia Pitch, 9/16 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Atkore International 4025010 Rigid Non-Metallic Schedule 40 Electrical Conduit, 2-1/2 in Belled End Trade, 2.414 in Dia Inside x 2.875 in Dia Outside, 10 ft L, PVC
Atkore provides the full range of PVC electrical conduit in diameters 1/2" through 8".
Appleton® UNILETS™ LR125A Type LR Conduit Outlet Body, 1-1/4 in Hub, Form 85 Form, 34.8 cu-in Capacity, Pressure Cast Aluminum, Epoxy Powder Coated
Appleton® Form 85™ UNILETS™ Conduit Outlet Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
ONIX-CLEAR LENS WITH BLACK. AND BLUE FRAME-PSPSN4910S >
1-GALLON LATEX WHITE TRAFFIC PAINT-JWH799871 >
