HCI Preferred Supplier 14041612 Swivel Adapter, 1 x 3/4 in Nominal, MNPT x Female NPSM, Steel
HCI Preferred Supplier 14041612 Swivel Adapter, 1 x 3/4 in Nominal, MNPT x Female NPSM, Steel
-
BrandGeneric
-
Manufacturer Part Number14041612
-
CountryUSA
-
MaterialSteel
-
Nominal Size1 x 3/4 in
-
End StyleMNPT x Female NPSM
- NPSM fittings include an inverted 60 deg cone inside an internally threaded swivel union nut
- Male NPTF fittings that have a 30 deg internal chamfer that make a 60 deg inverted cone, will mate with NPSM swivel unions
- The mating male threads must include an inside chamfer on the end of the fitting that mates with the inverted cone
- Threads are for clamping force only
- The sealing occurs on a small radial section between the male fitting internal chamfer and the swivel union inverted cone
- NPT and NPTF pipe threads seal by wedging the tapered threads through deformation into each other
- Both of these threads require thread sealants to complete a seal
-
UNSPSC27112800
-
Package Description1/PK
-
Standards/ApprovalsSAE 140130
-
Catalog
Recently Viewed
HCI Preferred Supplier 14041612 Swivel Adapter, 1 x 3/4 in Nominal, MNPT x Female NPSM, Steel
HCI Preferred Supplier 14041612 Swivel Adapter, 1 x 3/4 in Nominal, MNPT x Female NPSM, Steel
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
Enerpac® FZ-1614 FZ Series High Pressure Straight Hydraulic Connector, 3/8-18 Nominal, FNPT, Steel, Domestic
Fitting are used to connect all cylinders, components, power sources, tubes, gauges and hoses in a hydraulic system. Enerpac fittings provide flexible, safe and leak-free connections. Use fittings and tubing in high cycle applications and areas having excessive heat or weld splatter. High pressure hydraulic fittings allow connection of many components with minimum effort.
