Hydraulic Quick Connect Fittings
Snap-Tite by Dixon® 4VF4 H Series Interchange Valved Quick Connect Coupling, 1/2-14 Nominal, FNPT, Steel, Domestic
Snap-Tite by Dixon® 4VF4 H Series Interchange Valved Quick Connect Coupling, 1/2-14 Nominal, FNPT, Steel, Domestic
PS-800X4X4M 1/4" -male Pipe Thread Quick Coupler Plug
1/4" -MALE PIPE THREAD QUICK COUPLER PLUG-FTGPS800X4X4M >
PS-800X4X4F 1/4" -female Pipe Thread Quick Coupler Plug
1/4" -FEMALE PIPE THREAD QUICK COUPLER PLUG-FTGPS800X4X4F >
P-400X8X8-M 1/2" Male Quick Connect Plug
1/2" MALE QUICK CONNECT PLUG-FTGP400X8X8M >
P-400X8X6-M 1/2" X 3/8" Male Quick Connect Plug
1/2" X 3/8" MALE QUICK CONNECT PLUG-FTGP400X8X6M >
P-400X8X6-F 1/2" X 3/8" Female Quick Connect Plug
1/2" X 3/8" FEMALE QUICK CONNECT PLUG-FTGP400X8X6F >
P-400X6X8-M 3/8" X 1/2" Male Quick Connect Plug
3/8" X 1/2" MALE QUICK CONNECT PLUG-FTGP400X6X8M >
P-400X4X2-M 1/4" Male Plug x 1/4" Male National Thread
1/4" MALE PLUGX1/4" MALE NATIONAL PIPE THREAD-FTGP400X4X2M >
P-200X8X8-F 1/2" X 1/2" Female Quick Connect Plug
1/2" X 1/2" FEMALE QUICK CONNECT PLUG-FTGP200X8X8F >
Milton 1816 1/2" MNPT G style couplers are used in applications that require over 60 SCFM. There are two Milton G style couplers, but both will function the same with G style plugs. G style couplers are the highest SCFM rated coupler.
HCI Preferred Supplier 99825 Industrial Interchange Pipe Coupler, 1/2 in Nominal, MNPT, Steel
Milton 1815 1/2" MNPT G style couplers are used in applications that require over 60 SCFM. There are two Milton G style couplers, but both will function the same with G style plugs. G style couplers are the highest SCFM rated coupler.
1/2 in FNPT G-style Couplers are used in applications that require over 60 scfm. There are two Milton® G-style Couplers, but both will function the same with G-style plugs. Milton® G-style Couplers are made of steel and are plated to resist rust. With a 1/2 in basic flow size, these plugs offer up to 99 scfm, making them the highest scfm rated Couplers. maximum pressure of 300 psi.
Milton 1858 1/2" FNPT G style plugs are made of case hardened steel and are plated to resist rust. G style plugs offer a basic flow size of 1/2" and a maximum pressure of 300 PSI. With air flow of up to 99 SCFM, G style plugs are perfect for applications
HCI Preferred Supplier 99803 Industrial Interchange Pipe Plug, 1/2 in Nominal, FNPT, Steel
HCI Preferred Supplier NV12F Snap-Tite® 60 AG Interchange Quick Disconnect Pipe Coupler, 1/2 in Nominal, FNPT End Style, Chrome Alloy Steel Locking Ball/Nitrite Seal/Steel
HCI Preferred Supplier NV12F Snap-Tite® 60 AG Interchange Quick Disconnect Pipe Coupler, 1/2 in Nominal, FNPT End Style, Chrome Alloy Steel Locking Ball/Nitrite Seal/Steel
HCI Preferred Supplier HNV38M Interchange Pipe Plug, 3/8 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV38M Interchange Pipe Plug, 3/8 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV38F Interchange Pipe Coupler, 3/8 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV38F Interchange Pipe Coupler, 3/8 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV34M Interchange Pipe Plug, 3/4 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV34M Interchange Pipe Plug, 3/4 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV1M Interchange Pipe Plug, 1 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV1M Interchange Pipe Plug, 1 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV1F Interchange Pipe Coupler, 1 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV1F Interchange Pipe Coupler, 1 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV14M Interchange Pipe Plug, 1/4 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV14M Interchange Pipe Plug, 1/4 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier FF38M FF Series Pipe Plug, 3/8 in Nominal, FNPT, PTFE Seal/Steel
HCI Preferred Supplier FF38M FF Series Pipe Plug, 3/8 in Nominal, FNPT, PTFE Seal/Steel
Recently Viewed
METRIC NOTCHED V-BELT-JASXPZ710 >
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
3/4" X 144" Square Plain Keystock
Jacobs® JCM6289 Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 5/8-16 Threaded Mounting, Plain Bearing, K32 Key
Jacobs® JCM6289 Medium Duty Drill Chuck, 0.08 to 0.5 in Capacity, 5/8-16 Threaded Mounting, Plain Bearing, K32 Key
1-15/16" -ID R-1-STYLE BUSHING-IDCR1115/16 >
Browning® 1045293 VP Series Type 1 Variable Pitch Sheave, 7/8 in Finished Bore, 3.15 in OD, 1 Groove, 1.7 to 2.5 in (3L)/2 to 3 in (A/4L)/2.5 to 3.3 in (B/5L) Dia Pitch, 21/32 to 1 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
