Gates® Power Transmission MegaCrimp™ 8G-10FJX G25 Straight Hydraulic Coupling, 1/2 in x 7/8-14 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
-
BrandGates® Power Transmission
-
UPC072053323092
-
Manufacturer Part Number8G-10FJX
-
CountryUSA|Canada
-
MaterialCarbon Steel
-
TypeStraight
-
Nominal Size1/2 in x 7/8-14
-
Hex Size22 mm Stem, 27 mm Nut
-
SeriesG25
-
Domestic/ImportImport
-
Length3.01 in
-
End StyleHose x 37 deg Female JIC Flare Swivel
- Robust "Bite-the-wire" crimp
- Low profile
- Full stem insertion
- Full length crimp
- Tested to industry leading 600000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat™ plating for 3X better corrosion resistance than SAE standard
- 1.63 in cut-off length
-
Alternative Part NumberG25170-0810|710308215
-
UNSPSC40172601
-
Package Description5/PK
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Gates® Power Transmission MegaCrimp™ 8G-10FJX G25 Straight Hydraulic Coupling, 1/2 in x 7/8-14 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
MORSE® 90780 5943T Center Cutting Regular Length Single End End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, TiAlN Coated
Gates® Power Transmission Poly Chain® GT®2 14MX-40S-37 Synchronous Sprocket, 7/8 to 3-1/4 in Taper-Lock® Bore, 6.91 in OD, 40 Grooves, 7.018 in Dia Pitch, 2.06 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
HCI Preferred Supplier 28183L Light Pattern Reducer Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, Brass
HCI Preferred Supplier 28183L Light Pattern Reducer Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, Brass
Champion SA80-.776 Car/Maintenance Reamer, 0.776 in Dia x 7 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-.776 Car/Maintenance Reamer, 0.776 in Dia x 7 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
Wooster® Pelican® 8619 Hand Held Pail With Strap, 1 qt, 8-1/2 in L x 7 in W, Plastic, Clear
Wooster® Pelican® 8619 Hand Held Pail With Strap, 1 qt, 8-1/2 in L x 7 in W, Plastic, Clear
