Weiler® 00104 TLN-4 Narrow Face Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 00104 TLN-4 Narrow Face Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 3/8 in Arbor Hole
-
BrandWeiler®
-
UPC012382001049
-
Manufacturer Part Number00104
-
CountryUSA|Canada
-
Face Width1/2 in
-
Filament/Wire Diameter0.006 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed12500 rpm
-
Trim Length7/8 in
-
TypeNarrow Face
-
Arbor Hole Size3/8 to 1/2 in
-
SeriesTLN-4
-
Attachment TypeUnthreaded Arbor
-
Brush Diameter4 in
- Intended for use on straight grinders and stationary machines such as bench or pedestal grinders and buffing lathes
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MK5100104 |
| MSC | 06669634 |
| Fastenal | 0813120 |
-
Alternative Part Number104
-
UNSPSC31171805
-
Package Description2/PK
-
Standards/ApprovalsANSI B165.1
Recently Viewed
Weiler® 00104 TLN-4 Narrow Face Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 00104 TLN-4 Narrow Face Wheel Brush, 4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 3/8 in Arbor Hole
HCI Preferred Supplier 20082C Swivel Elbow, 1/4 in Nominal, Tube x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
HCI Preferred Supplier 20082C Swivel Elbow, 1/4 in Nominal, Tube x MNPT, 0 to 150 psi Pressure, Brass/Composite Polyacetal
3/4" X 1-1/2" HEAVY DUTY RECT DIE SPRINGS-LANSHDR750150 >
PUR/GRN FRAME W/GRAY LENS-UVXUVS139C>
Used as in-line protection for fluorescent fixtures, the Littelfuse® LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. On a 277 VAC system a fault occurring in an un-fused fixture could take out the entire branch circuit affecting upto 100 fixtures. This could cause safety problems as well as shut down operations. By individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Fuse holders are rated upto 10 A at 300 VAC and are equipped with 7 in 18 AWG leads. Order part number LHR 000 for two leads and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
DeWALT® DDF1351400 Safety Strip, 0.27 Caliber, Yellow, 4 Level, Strip, For Use With DDF212035P, DDF2120350 DEWALT, 52000, 52001, 52019, 52025, 52010, 50266, 52051 Power, SA270, XT540, Cobra, Viper Ramset, DX 36, DX 460 Hilti® and 12700 Duofast
