NIBCO 4" SCH-80 CPVC L/R SOCKET FLANGES NIB 1854-040
Loose Ring Flange, 4 in Nominal, CPVC, Socket Connection, 150 lb, Domestic
-
BrandLasco®
-
UPC025528768621
-
Manufacturer Part Number9854-040FT
-
CountryUSA
-
Temperature Rating73.4 deg F
-
MaterialCPVC
-
Pressure Class150 lb
-
Pressure Rating150 psi
-
TypeLoose Ring
-
Connection TypeSocket
-
Schedule RatingSCH 80/XH
-
Nominal Size4 in
-
Domestic/ImportDomestic
- ASTM D-1784: Rigid PVC compounds and chlorinated PVC (CPVC) compounds
- ASTM F-437: Threaded chlorinated PVC (CPVC) plastic pipe fittings, SCH 80/XH
- ASTM F-439: Socket type chlorinated PVC (CPVC) plastic pipe fittings, SCH 80/XH
- Material: Fittings are produced from CPVC type IV, grade I
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174000
-
Package Description5/CTN
-
Standards/ApprovalsASTM D1784|ASTM F437|ASTM F439|ANSI B16.5|NSF Approved
-
WarrantyLimited
-
Catalog
-
Specification Sheet
Recently Viewed
Loose Ring Flange, 4 in Nominal, CPVC, Socket Connection, 150 lb, Domestic
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
400-WATT PULSE START METAL HALIDE BULB-BULM400/U/BT28/PS >
Dichtomatik 75102029 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/8-AMP FUSES-LITV3131/8 >
