NIBCO 1854-030 Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
-
BrandLasco®
-
UPC025528768614
-
Manufacturer Part Number9854-030FT
-
CountryUSA
-
Temperature Rating73.4 deg F
-
MaterialCPVC
-
Pressure Class150 lb
-
Pressure Rating150 psi
-
TypeLoose Ring
-
Connection TypeSocket
-
Schedule RatingSCH 80/XH
-
Nominal Size3 in
-
Domestic/ImportDomestic
- ASTM D-1784: Rigid PVC compounds and chlorinated PVC (CPVC) compounds
- ASTM F-437: Threaded chlorinated PVC (CPVC) plastic pipe fittings, SCH 80/XH
- ASTM F-439: Socket type chlorinated PVC (CPVC) plastic pipe fittings, SCH 80/XH
- Material: Fittings are produced from CPVC type IV, grade I
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174000
-
Package Description5/CTN
-
Standards/ApprovalsASTM D1784|ASTM F437|ASTM F439|ANSI B16.5|NSF Approved
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
NIBCO 1854-030 Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
Loose Ring Flange, 3 in, CPVC, Socket, 150 lb, Domestic
2-3/16" -ID 2-BOLT PILLOW BLOCK-BRWSPB1000EX23/16 >
Koyo TRA-1828 Double Direction Thrust Washer, 28.58 mm ID x 44.45 mm OD, 0.81 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
B&K® 109-814 ProLine™ Thread Outlet Float Valve, 3/4 in Nominal, Male Inlet x Plain Outlet End Style, 125 psi Pressure, Domestic
The B&K™ Valves are precisely engineered for outstanding service, long life and reliable performance. These valves offer easy operation, superior flow and include a wide range of water/oil/gas (WOG) valves, gas valves and water valves constructed from forged brass, CPVC and PVC materials. Valves are arranged in series reflecting the valves performance characteristics, connection types and handle style. B&K™ valves are created to meet UPC and ICC plumbing code requirements and are certified to meet NSF 61 with many available in lead-free compliant versions.
Milwaukee® 2962-22 M18™ FUEL™ Cordless Variable Mid-Torque Impact Wrench, 1/2 in, 650 in-lb Torque, 18 V, 6 in OAL
The MILWAUKEE® M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. This kit includes (1) M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Contractor Bag.
Weiler® 08835 Wheel Brush, 7 in Dia Brush, 5/8 in W Face, 0.014 in Dia Filament/Wire Standard/Twist Knot Filament/Wire, 5/8 in Arbor Hole
Weiler® 7 in standard twist knot wire Wheel Brush provides a heavy duty brushing action with some flexibility for demanding deburring cleaning and surface preparation applications on somewhat irregular surfaces. 5/8 in arbor hole for use on right angle grinders.
