Krylon OSHA ORANGE TOUGH COAT SPRAY PAINT KRY S-01210
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
-
BrandKrylon®
-
UPC075577912100
-
Manufacturer Part NumberA01210007
-
CountryUSA
-
Temperature Rating70 deg F
-
FinishHigh Gloss
-
Chemical CompositionAcetone, Propane, n-Butyl Acetate, Light Aliphatic Hydrocarbon Solvent, Butane, Ethyl 3-Ethoxypropionate, Titanium Dioxide, Xylene, Ethylbenzene, Zirconium 2-Ethylhexanoate, Unsaturated Fatty Acids
-
FormLiquid
-
ColorSafety Orange
-
VOC Content0.65
-
Viscosity<20.5 cSt
-
Container Size12 oz
-
Container TypeAerosol Can
-
Coverage20 to 25 sq-ft
-
pH Range7
- Tough, protective coating resists chipping and peeling
- Dries to Touch® in 15 min
- VOC/MIR compliant
- 24 months shelf life
- -20.2 deg F flash point
- Film degration, loss of gloss and staining gas resistance
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | LP4001210 |
-
Alternative Part NumberS01210
-
UNSPSC31211501
-
Package Description12/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
Specification Sheet
-
SDS
Recently Viewed
Tough Coat® provides the ultimate in durability and protective finishes. This high solids formula ensures maximum coverage and performance. Tough Coat® acrylic Enamels features our exclusive EZ Touch® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high solids formula ensures maximum coverage and performance. Tough coat delivers the ultimate in protection, durability, high gloss and color retention.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
SM SBCP01.0 Pipe Fitting
YELLOW JACKET TRAPS-JWH757446>
Festo 153169 QSSF Push-In Straight Bulkhead Fitting, 9 mm Nominal, G3/8 FNPT x 10 mm Tube, -0.95 to 14 bar Pressure, Brass
Festo 153169 QSSF Push-In Straight Bulkhead Fitting, 9 mm Nominal, G3/8 FNPT x 10 mm Tube, -0.95 to 14 bar Pressure, Brass
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
