NS-11-GAL KLEAN STRIP
1-GAL NO SAND SURFACE PREP-KLNNS11GAL>
Recently Viewed
1-GAL NO SAND SURFACE PREP-KLNNS11GAL>
Coilhose® PFE60506T Flexeel® PFE6 Straight Air Hose With Reusable Strain Relief, 3/8 in, 3/8 in MPT Rigid, 50 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
Drillco 72A164C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 1 in Dia Shank, 4 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
MORSE® 43276 1895 Double End Non-Center Cutting Regular Length End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 43276 1895 Double End Non-Center Cutting Regular Length End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
Drillco 73A140C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
MORSE® 44205 4552 Center Cutting Extra Long Length Single End End Mill, 5/8 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 6-1/8 in OAL, Bright
MORSE® 44205 4552 Center Cutting Extra Long Length Single End End Mill, 5/8 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 6-1/8 in OAL, Bright
