Results 1 - 5 of 5
Grid

Hard Hat 7715 and 7778 should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc. Provides heat resistance up to 750 deg C (1380 deg F) dry heat (short term peak resistance) in sheltered or interior environments.

Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.

Alkyd High Heat Coatings offer three levels of heat protection and will withstand continuous exposure to the temperatures in their posted range. General Purpose is designed for surfaces exposed to temperatures up to 400 deg F. Heavy Duty is designed for surfaces exposed to temperatures up to 800 deg F. High-Performance offers the highest level of heat protection for surfaces exposed to temperatures up to 1200 deg F. These products are self-priming can be applied directly to metal and prepared previously coated surfaces.

Krylon® K01505777 Solvent Based High Heat Spray Paint, 12 oz Container, White, 20 sq-ft Coverage, 15 min Curing

Krylon® K01407777 Solvent Based High Heat Spray Paint, 12 oz Container, 20 sq-ft Coverage, 15 min Curing

Recently Viewed

3/8" -MALE PIPE THREADX1/8" -MALE PIPE THREAD GALVANIZED BUSHING

3" X 1-1/4" GALVANIZED BUSHING-JPW3X11/4GB >

#80-2 ROLLER CHAIN OFFSET LINKS-ROL802OL >

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.

My Wishlist
Compare

50-SDS-42 42 Tooth Sprockets For #50

QD SPROCKETS
$89.96

42 TOOTH SPROCKETS FOR #50 CHAIN-IDC50SDS42 >

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu