Krylon WHITE U/D W/B STRIPING SPRAY PAINT KRY K-05915
Krylon® Line-Up® K08305 Water Base Marking Paint, 20 oz Container, Liquid Form, White, 602 sq-ft Coverage
-
BrandKrylon®
-
UPC075577083053
-
Manufacturer Part NumberK08305
-
CountryUSA
-
Chemical CompositionPropane, Hexane, Light Aliphatic Hydrocarbon Solvent, Titanium Dioxide, Butane, 2-Methylpentane, Xylene, 3-Methylpentane, 2,3-Dimethylbutane, Toluene, Crystalline Silica, Respirable Powder, Ethylbenzene
-
FormLiquid
-
ColorWhite
-
TypeWater Base
-
VOC Content0.5383
-
Viscosity<20.5 cSt
-
Container Size20 oz
-
Container TypeAerosol Can
-
Coverage602 sq-ft
-
pH Range7
- Fast drying paint specifically formulated for striping lines on grass fields, cinder, dirt and other natural playing surfaces
- Marking paint will not blur or stain clothing with rough use
- Feature the non-clogging spray tip and is complemented by bulk paint for complete versatility
- Highly pigmented formulas fortified with optical brighteners
- Crisp, sharp stripes for eye catching lines that pop under stadium lighting
- Won't harm grass or stunt its growth
- Won't fade over time or stain uniforms
- Free of lead hazards
- 18 oz net weight
- 0.9 specific gravity
- Safe alternative to lime
- For athletic fields, where bright, crisp lines are required, Line-Up® Striping Paints provide a professional looking job quickly and easily
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3CPL9 |
-
UNSPSC31211513
-
Package Description12/CS
-
Standards/ApprovalsOSHA 29 CFR 1910.1200|NIOSH/MSHA Approved
-
SDS
Recently Viewed
Krylon® Line-Up® K08305 Water Base Marking Paint, 20 oz Container, Liquid Form, White, 602 sq-ft Coverage
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Gates® Power Transmission MegaCrimp™ 8G-10MJ G25 Straight Hydraulic Coupling, 1/2 in x 7/8-14 Nominal, Hose x Male JIC 37 deg Flare End Style, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
MORSE® 43261 1895 Double End Non-Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
Justrite® Aerosolv® 28111 Replacement Gasket, For Use With Aerosolv® 2 in ID Standard Aerosol Can Recycling System, Neoprene, Black
Justrite® Aerosolv® 28111 Replacement Gasket, For Use With Aerosolv® 2 in ID Standard Aerosol Can Recycling System, Neoprene, Black
COUNTER BRUSHES-FLP150 >
