Rust-Oleum 1-GAL DAMP-PROOF RED ENAMEL PRIMER RUS 769
-
BrandRust-Oleum®
-
UPC020066000479
-
Manufacturer Part Number769402
-
CountryUSA
-
Temperature Rating32 to 100 deg F
-
FinishHigh Gloss
-
Chemical CompositionStoddard Solvents, Limestone, Mineral Spirits, Talc, Wollastonite, Crystalline Silica
-
FormLiquid
-
ColorRed
-
Type1-Component
-
VOC Content<450 g/L
-
Container Size1 gal
-
Container TypeCan
-
Coverage230 to 390 sq-ft/gal
-
Series7400 System
-
Odor/ScentSolvent
- Penetrates down to the bare metal, driving out trapped air and moisture vs. trapping it in
- Minimizes prep time apply direct-to-rust
- Can be left exposed up to 1 year without top-coating
- Use on rusted steel surfaces where only minimal surface preparation
- Two-year rust proof guarantee - maximum corrosion protection
- 5 years shelf life
- Alkyd
- Self-priming
- Resists chipping, fading and weathering
- One coat hide
- 3 to 5 hrs tack-free dry time, 5 to 9 hrs handle dry time, 24 to 48 hrs recoat dry time
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5A260 |
-
UNSPSC31211509
-
Package Description2/PK
-
Standards/ApprovalsASTM Certified|USDA FSIS Approved
-
Specification Sheet
Recently Viewed
Take on tough jobs with the 1/4 in. VSR Drill. Featuring heat-treated steel gears that deliver durability and a rubber grip for comfort, this tool is designed to get the job done.
416066 DO-IT-BEST/HWI PRODUCTS
BRASS COMPRESSION NUTS 7/8" OD TUBE SIZE. SOLD AS 10 PER BAG-JWH416066 >
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
2" X 50-YDS 80-GRIT SHOP ROLLS-SAI80820 >
