Dodge® 123360 212 Medium Duty Set Screw Ball Bearing, 2-1/4 in Dia Bore, 4.3307 in OD, 2.31 in W, 11791 lb Dynamic/8100 lb Static Load
Dodge® 123360 212 Medium Duty Set Screw Ball Bearing, 2-1/4 in Dia Bore, 4.3307 in OD, 2.31 in W, 11791 lb Dynamic/8100 lb Static Load
-
BrandDodge®
-
UPC782475231478
-
Manufacturer Part Number123360
-
CountryUSA
-
Load Capacity11791 lb Dynamic/8100 lb Static
-
Cage MaterialCast Iron
-
Temperature Rating225 to 400 deg F
-
FinishUncoated
-
Maximum Speed3500 rpm
-
TypeMedium Duty
-
Width2.31 in
-
Series212
-
Outside Diameter4.3307 in
-
Bore Diameter2-1/4 in
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100738397 |
| Applied Industrial Technologies | 100738397 |
-
Alternative Part NumberINS-SCM-204
-
UNSPSC31171504
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 123360 212 Medium Duty Set Screw Ball Bearing, 2-1/4 in Dia Bore, 4.3307 in OD, 2.31 in W, 11791 lb Dynamic/8100 lb Static Load
Dodge® 123360 212 Medium Duty Set Screw Ball Bearing, 2-1/4 in Dia Bore, 4.3307 in OD, 2.31 in W, 11791 lb Dynamic/8100 lb Static Load
Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
Heritage™ BPS-214 Imperial Bridge Pin, 0.093 in Dia x 2-1/2 in L, Fits Shaft 3/8 to 3/4 in, Stainless Steel, Plain
MORSE® 22211 1655 Chucking Reamer, 0.374 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 22211 1655 Chucking Reamer, 0.374 in Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
INS-SC-008 Dodge® 123328 203 Normal Duty Set Screw Ball Bearing, 1/2 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
INS-SC-008 Dodge® 123328 203 Normal Duty Set Screw Ball Bearing, 1/2 in Dia Bore, 1.5748 in OD, 1 in W, 2158 lb Dynamic/1079 lb Static Load
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
Thomson® 60 Case® LinearRace® SB20 Standard Type SB Shaft Support Block, 1-1/4 in Dia Shaft, 4 in L x 1.13 in W x 3 in H
Shaft support blocks are used for end or intermittent support where loads are light and deflection between supports is not a problem. Unlike shaft support rails, blocks do not permit longitudinal passage of open-type Ball Bushing® bearings. Type SB shaft support blocks enable clamping of shafts and eliminate the need for bolts, to maintain shaft position. Shimming is suggested for high-precision applications to eliminate the effect of variations in surface of base or manufacturing tolerances between supports.
