Lift-All 72"PURPLE ENDLESS ROUND POLY SLING LIF EN-30 X 6
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
-
BrandLift-All®
-
UPC697886100629
-
Manufacturer Part NumberEN30X6
-
CountryUSA
-
Temperature Range-50 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity2100 lb
-
ResistsUV Sunlight, Grease and Most Acids
-
ColorPurple
-
TypeEndless
-
Vertical Hitch Capacity2600 lb
-
Width Under Load1 in
-
Diameter5/8 in
-
Basket Hitch Capacity5200 lb
-
Length6 ft
- Tuflexâ„¢ round sling is an endless synthetic sling made from a skein (continuous loop or hank) of polyester yarn covered by a double wall tubular jacket
- These durable and versatile endless slings will become your first choice for synthetic slings once you've tried them
- The round sling body can also be compared to sling webbing with the tubular jacket face yarns woven without binder yarns, this allows the core yarns to move independently within the jacket
- Low stretch (about 3 Percent at rated capacity)
- Maintains 100 Percent of original strength until jacket damage exposes core yarns
- When core yarns are visible, sling must be removed from service
- Chokes tighter, releases easier than other slings
- No strength loss from abrasion to cover
- Good for low headroom lifts
- Wear points can be shifted to extend sling life
- Light weight reduces fatigue and strain on riggers
- Replacement is not necessary until the red striped white core yarns can be seen through holes in the jacket
- Always protect synthetic slings from being cut by corners and edges
- See Sling Protection section in the Lift-All catalog
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3KN76 |
| MSC | 89673578 |
| Fastenal | 45692 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA Compliant
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Tuflex endless roundslings are the most versitile roundsling. Tuflex roundslings are color-coded to easily identified capacities . The cover is seamless with no sewn edges, preventing rupture and allowing wear points to be shifted to extend sling life.
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
Browning® 1046184 VP Series Type 5 Variable Pitch Sheave, 1-3/8 in Finished Bore, 6.55 in OD, 2 Grooves, 4.9 to 5.9 in (A/4L)/5.2 to 6.4 in (B/5L/5V) Dia Pitch, 1-5/8 to 2-3/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
THESE BANJO HOSE BARBS ARE PRECISION MOLDED IN POLYPROPYLENE AND ARE GLASS REINFORCED FOR STABILITY, STRENGTH, AND TOUGHNESS. BANJO STRAIGHT HOSE BARB HAS A 1/4" MALE NPT WITH A 1/4: HOSE SHANK. HOSE BARBS ARE MOLDED SPECIFICALLY TO FIT PROPERLY INTO HOSES. 1/4" -2
- BAJHB050075 >
V-BELTOUTSIDE CIRCUMFERENCE >84-JASA82 >
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
