Crosby® 1018552, G209-1 1/8, Anchor Shackle, 9.5 ton Load, 1-1/8 in, 1-1/4 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018552 Anchor Shackle, 9.5 ton Load, 1-1/8 in, 1-1/4 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018552
-
CountryUSA
-
Load Capacity9.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length4-1/4 in
-
Inner Width2.91 in
-
Size1-1/8 in
-
Opening Size1.81 in
-
Body MaterialCarbon Steel
-
Overall Length7.47 in
-
Overall Width5.71 in
-
Eye Outer Size2.69 in
-
Pin Diameter1-1/4 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 29WP68 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018552, G209-1 1/8, Anchor Shackle, 9.5 ton Load, 1-1/8 in, 1-1/4 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018552 Anchor Shackle, 9.5 ton Load, 1-1/8 in, 1-1/4 in Dia Screw Pin, Hot Dipped Galvanized
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
DISHWASHER CONNECTOR-JWH402674 >
10-IN-1 SCREWDRIVER-JWH382272 >
GP® 4112R Standard Length Socket, 1 in, 3-1/2 in Hex Socket, 6 Points
Browning® Gripband® 3079621 Cogged V-Belt, 3VX Section, 3/8 in W Top, 75 in L Outside, 15/16 in THK, Neoprene
Browning® Gripband® 3079621 Cogged V-Belt, 3VX Section, 3/8 in W Top, 75 in L Outside, 15/16 in THK, Neoprene
