Drillco 31E070BB 3100E Adjustable Round Split Die, M7x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
-
BrandDrillco
-
UPC045996996524
-
Manufacturer Part Number31E070BB
-
CountryUSA|Canada
-
FinishBright
-
Thread DirectionRight
-
MaterialHSS
-
Thread SizeM7x1
-
Measurement SystemMetric
-
TypeAdjustable
-
Series3100E
-
Die Outside Diameter1 in
- Adjustable screws for microadjustment to fit slightly different diameter sizes
- Bright finish for smooth operation
- Outer Diameter is designed to be used with Drillco die stocks
- Outer Diameter is designed to be used with Drillco die stocks
-
UNSPSC27112805
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
HCI Preferred Supplier 80206 Pressure Gauge, 0 to 200 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80206 Pressure Gauge, 0 to 200 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
MORSE® 32344 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-3/4-8 Thread, H6 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
MORSE® 32344 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-3/4-8 Thread, H6 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
1-LB DRYWALL NAILS-JWHDRYWALLNAIL >
United Abrasives-SAIT 84256 Sanding Sheet, 11 in L x 9 in W, 320 Grit, Silicon Carbide Abrasive, Paper Backing
United Abrasives-SAIT 84256 Sanding Sheet, 11 in L x 9 in W, 320 Grit, Silicon Carbide Abrasive, Paper Backing
Hougen® Rotabroach® 12124 12000 Annular Cutter, 3/4 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
