Crosby® 1018598, G-209-1 3/8, Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1-1/2 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018598 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1-1/2 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018598
-
CountryUSA
-
Load Capacity13.5 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length5-1/4 in
-
Inner Width3.63 in
-
Size1-3/8 in
-
Opening Size2-1/4 in
-
Body MaterialCarbon Steel
-
Overall Length9.16 in
-
Overall Width6.83 in
-
Eye Outer Size3-5/16 in
-
Pin Diameter1-1/2 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP70 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018598, G-209-1 3/8, Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1-1/2 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018598 Anchor Shackle, 13.5 ton Load, 1-3/8 in, 1-1/2 in Dia Screw Pin, Hot Dipped Galvanized
Edison GDC-40MA Low Breaking Small Dimension Time Delay Fuse With Nickel Plated Brass End Caps, 40 mA, 250 V AC, 35 A, Cylindrical Body
Edison GDC-40MA Low Breaking Small Dimension Time Delay Fuse With Nickel Plated Brass End Caps, 40 mA, 250 VAC, 35 A, Cylindrical Body
36-T SPROCKETS FOR #60 CHAIN IDC 60-B-36-F-1-5/8
36 TOOTH SPROCKETS FOR #60 CHAIN
MORSE® 32344 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-3/4-8 Thread, H6 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
12-VOLT TENDER BATTERY CHARGERS-HCB734357000078 >
Drillco 73A116C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.

