Crosby® 1016898 HR-125 Swivel Hoist Ring, 1000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 3/8-16 UNC Thread
Crosby® 1016898 HR-125 Swivel Hoist Ring, 1000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 3/8-16 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016898
-
CountryUSA
-
Load Capacity1000 lb
-
Thread Size3/8-16 UNC
-
SeriesHR-125
-
Dimensions1.87 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016898 HR-125 Swivel Hoist Ring, 1000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 3/8-16 UNC Thread
Crosby® 1016898 HR-125 Swivel Hoist Ring, 1000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.34 in Bail, 3/8-16 UNC Thread
Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.
AGA-3 3-AMP GLASS AUTO FUSES--CARD OF 5-JWH581711 >
Greenlee® 720 Keyway Nibbler Punch, 1/8 in, 3/16 in Dia
High grade alloy steel set screws with hexagon recessed heads. Ends have cup points for positive torque. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 200-piece set screw Assortment contains: (10) 6-32 x 3/16 in, (10) 8-32 x 3/16 in, (10) 10-24 x 1/4 in, (30) 1/4-20 x 1/4 in, (20) 1/4-28 x 1/4 in, (20) 1/4-20 x 3/8 in, (30) 5/16-18 x 3/8 in, (20) 5/16-24 x 3/8 in, (20) 5/16-18 x 1/2 in, (10) 3/8-16 x 3/8 in, (10) 3/8-24 x 3/8 in and (10) 3/8-16 x 1/2 in.
Crosby® 1017538 209-A-3/4 Anchor Shackle, 7 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1017538 Anchor Shackle, 7 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
