WERNER 20' 300# 1-A F/GLS TWIN STEPLADDER WER T-7420
The T7420 fiberglass 20 ft twin step ladder features a duty rating of 300.pounds per side of the ladder. Designed for one or two person jobs, the T7400 ladders have heavy gauge aluminum tops and feature heavy duty internal spreaders to resist damage around the worksite or in transit. The Glas*Mark® Violater stripes on the rails make the ladder more visible and the EDGE® bracing system and external rail shields add to the long lasting durability of these ladders. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751033205
-
Manufacturer Part NumberT7420
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
TreadRibbed
-
TypeType IAA
-
SeriesT7400
-
Base Spread150-1/8 in
-
Number of Steps19
-
Ladder Height20 ft
-
Bottom Width49-1/2 in
- Heavy gauge aluminum extruded top with thick side plates
- Back up aluminum plates reinforce all top connectors
- Shoulder bolt and lock nut on top hinge
- 4 solid aluminum rivets attach top to each rail
- Slip resistant TRACTION-TRED® steps are double riveted and knee braced
- Extra heavy duty internal aluminum spreaders
- Rubber step bumpers to resist damage
- EDGE® bracing system helps to decrease damage to rail
- Glas*Mark® violator stripes on rails allow ladder to be more visible
- Aluminum external rail shield helps protect against abrasion damage
- Shoe pads riveted to the EDGE® structure
- Every rivet backed up by metal, metal plates or washer to protect rails
- Design for one or two person jobs
- Maximum load per side, including person and materials, shall not exceed duty rating of ladder
- 17 ft 3 in H maximum standing
- Heavy edge bracing
- 8-1/4 x 14-1/2 in top
- 1-3/16 in front and rear flange
- 3 in steps
- Aluminum spreader
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 99298986 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The T7420 fiberglass 20 ft twin step ladder features a duty rating of 300.pounds per side of the ladder. Designed for one or two person jobs, the T7400 ladders have heavy gauge aluminum tops and feature heavy duty internal spreaders to resist damage around the worksite or in transit. The Glas*Mark® Violater stripes on the rails make the ladder more visible and the EDGE® bracing system and external rail shields add to the long lasting durability of these ladders. Fiberglass rails are non-conductive for working near electricity.
The new PD6204-4C podium ladder with factory installed casters for added mobility offers the same reach height as a 6 ft step ladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra large platform with toe guard feels like you are standing on the ground and 4X work zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed foot gives the bottom of the ladder protection from every angle with an integrated rail shield and over sized foot pads. The durable caster assembly with stainless steel spring, steel stem and ball bearing swivel eliminates the need for a separate brake. The 4 soft rubber casters allow for easy 360 deg mobility and designed to roll over thresholds.
5/16" X 1-7/8" MAGNETIC NUTDRIVERS-JWH355760>
The D7128-2 extension ladder boasts a duty rating of 375 pounds and features the exclusive ALFLO® rung joint that guarantees TWIST-PROOF® performance. External guides at top of base section help secure the interlocking side rails. Pre-pierced holes at the top of the fly section allow for easy field installation of accessories. The plate and rung assembly are riveted at four points to each side rail. The TRACTION-TRED® D-rungs are slip resistant and the durable rail shield and shoe bracket protects the rail from damage.
Apex® 445-3X Insert Bit, 8F-10R Slotted Point, 1 in OAL, Steel
The D7120-2 extension ladder boasts a duty rating of 375 pounds and features the exclusive ALFLO® rung joint that guarantees TWIST-PROOF® performance. External guides at top of base section help secure the interlocking side rails. Pre-pierced holes at the top of the fly section allow for easy field installation of accessories. The plate and rung assembly are riveted at four points to each side rail. The TRACTION-TRED® D-rungs are slip resistant and the durable rail shield and shoe bracket protects the rail from damage. Note: image displayed is D7124-2 24 ft type IAA fiberglass D-rung extension Ladder.



