Louisville 8' 300# 1-A ALUMINUM STEPLADDERS LOU AS-3008
This Louisville 8 foot aluminum step ladder has a load capacity of 300lb, rated ANSI Type IA. This ladder is equipped with the innovative ProTop with magnet and multiple tool slots, molded pail shelf, angled aluminum slip-resistant rubber feet, steel gusset bracing, and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS3008 step ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
-
BrandLouisville®
-
UPC728865100146
-
Manufacturer Part NumberAS3008
-
CountryUSA
-
Load Capacity300 lb
-
MaterialAluminum
-
TreadAnti-Slip
-
TypeType IA Standard
-
SeriesAS3000
-
Base Spread52-5/8 in
-
Number of Steps7
-
Ladder Height8 ft
-
Bottom Width24-3/4 in
- Multifunctional ProTop With Multiple Tool Slots
- Molded Pail Shelf
- Center-Pull Spreader Braces
- Heavy-Duty Gusset Bracing
- Angled Aluminum Slip-Resistant Rubber Feet
- 3 in step depth
- 5 ft 8 in maximum standing height
- 12 ft 3 in maximum reach
- 10-1/2 in closed cubic feet
- 99-3/8 in closed height
- 24-3/4 in closed width
- 7-3/8 in closed depth
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 36Y392 |
-
UNSPSC26120000
-
Package DescriptionEACH
-
Standards/ApprovalsANSI A14.2|CSA Certified|OSHA Compliant
-
Catalog
Recently Viewed
This Louisville 8 foot aluminum step ladder has a load capacity of 300lb, rated ANSI Type IA. This ladder is equipped with the innovative ProTop with magnet and multiple tool slots, molded pail shelf, angled aluminum slip-resistant rubber feet, steel gusset bracing, and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS3008 step ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
6" X 3/4" BENCH GRINDING WHEEL-JET576207 >
HCI Preferred Supplier 20072P Fixed Elbow, 3/8 x 1/4 in Nominal, Push-In x MIP, Plastic
HCI Preferred Supplier 20072P Fixed Elbow, 3/8 x 1/4 in Nominal, Push-In x MIP, Plastic
FEELER GAUGE IS MADE FROM 1/2" WIDE SPRING STEEL STOCK, CLOSE GRAIN C1095 HIGH CARBON STEEL. HARDENED AND TEMPERED TO RC 48-62. USED IN MANUFACTURING, TOOL & DIE, AND MAINTENANCE OPERATIONS WHEREVER SETTING CLOSE SPACING OR CHECKING EXTREMELY TIGHT TOLERANCES IS REQUIRED
-PRC19165 >
3/4" ALUMINUM CAM & GROOVE COUPLER-DXN75CAL >
HCI Preferred Supplier 20058P Connector, 3/8 x 1/4 in Nominal, Push-In x MNPTF, Plastic
HCI Preferred Supplier 20058P Connector, 3/8 x 1/4 in Nominal, Push-In x MNPTF, Plastic





