WERNER 5' 300# 1-A F/GLS STEPLADDERS WER 6205
The 6205 Fiberglass 5 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751014907
-
Manufacturer Part Number6205
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread4-1/2 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread35-1/8 in
-
Number of Steps4
-
Ladder Height5 ft
-
Bottom Width21-5/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
The 6205 Fiberglass 5 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Milwaukee® SHOCKWAVE™ 49-66-4503 Magnetic Nut Driver, 5/16 in Drive, Proprietary Steel
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
18" 175# UV BLACK CABLE TIE--BAG OF 50-CTE18175UV50 >
MORSE® 11437 1330 General Purpose Jobber Length Drill Bit, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 14506 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 135 deg Point, HSS
V-BELTOUTSIDE CIRCUMFERENCE 100."-JAS3V1000 >
