WERNER 3' 300# TYPE-1-A F/GLS STEPLADDERS WER 6203
The 6203 Fiberglass 3 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751014884
-
Manufacturer Part Number6203
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread23-1/8 in
-
Number of Steps2
-
Ladder Height3 ft
-
Bottom Width18-1/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2113556 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
The 6203 Fiberglass 3 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
MORSE® 11491 1330 General Purpose Jobber Length Drill Bit, 35/64 in Drill - Fraction, 0.5469 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 12045 1330L General Purpose Jobber Length Drill Bit, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
Porter-Cable® 14700 Round Standard Adhesive Back Pad, For Use With 7334 and 7335 Random Orbit Sander, 5 in Dia, 5 Hole, 60 Grit, 10000 rpm
BBI 643417 Fully Threaded Cap Screw, M14x2, 50 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 643417 Fully Threaded Cap Screw, M14x2, 50 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
Browning 16-TOOTH #40-1 CHAIN SPROCKETS BRW H-4016 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
