WERNER 16' 300# 1-A F/GLS TWIN STEPLADDER WER T-7416
The T7416 Fiberglass 16 ft Twin Step Ladder features a duty rating of 300 pounds per side of the ladder. Designed for one or two-person jobs, the T7400 ladders have heavy gauge aluminum tops and feature heavy duty internal spreaders to resist damage around the worksite or in transit. The GLAS*MARK® Violater stripes on the rails make the ladder more visible and the Edge® bracing system and external rail shields add to the long lasting durability of these ladders. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751022179
-
Manufacturer Part NumberT7416
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
SeriesT7400
-
Base Spread120-1/4 in
-
Number of Steps15
-
Ladder Height16 ft
-
Bottom Width42-1/8 in
- Heavy gauge aluminum extruded top
- Back-up aluminum plates reinforce all top connectors
- Thick side plates
- Shoulder bolt and lock nut on top hinge, 4 solid aluminum rivets attach top to each rail
- Slip-resistant TRACTION-TRED® steps are double riveted and knee braced
- Extra heavy duty internal spreaders
- Glas mark violator stripes on rails allow ladder to be more visible
- Rubber step bumpers to resist damage
- The edge bracing system helps to decrease damage to rail
- Aluminum external rail shield helps protect against abrasion damage
- Shoe pads riveted to the edge structure
- Every rivet backed up by metal part or washer to protect rails
- 14 ft, 16 ft, 18 ft and 20 ft are 300 lbs, load capacity, type is duty rating (per side)
- Energy diffusing geometry
- 3-1/8 in wide rail
- 1-3/16 in wide flange
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113547 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
-
Owners/User Manual
Recently Viewed
The T7416 Fiberglass 16 ft Twin Step Ladder features a duty rating of 300 pounds per side of the ladder. Designed for one or two-person jobs, the T7400 ladders have heavy gauge aluminum tops and feature heavy duty internal spreaders to resist damage around the worksite or in transit. The GLAS*MARK® Violater stripes on the rails make the ladder more visible and the Edge® bracing system and external rail shields add to the long lasting durability of these ladders. Fiberglass rails are non-conductive for working near electricity.
4" X 3" SCHEDULE-80 CPVC REDUCER COUPLING - NIB1829422>
Klein® D333-8 Conduit Locknut and Reaming Plier, Knurled Tool Steel Jaw, 1-5/8 in L x 0.938 in W Jaw, 7-3/4 in OAL, 3/16 in W Tip
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
