WERNER® 7312 7300 Type IAA Single Sided Step Ladder, 12 ft H Ladder, 375 lb Load, 11 Steps, Fiberglass
The 7312 fiberglass 12 ft step ladder has a duty rating of 375 pounds and features heavy duty aluminum HolsterTop. With a full set of horizontals and heavy duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip resistant TRACTION-TRED® steps are single riveted and have extra wide knee braces. The Glas*Mark® violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751042917
-
Manufacturer Part Number7312
-
CountryUSA
-
Load Capacity375 lb
-
MaterialFiberglass
-
TreadRibbed
-
TypeType IAA Single Sided
-
Series7300
-
Base Spread79 in
-
Number of Steps11
-
Ladder Height12 ft
-
Bottom Width35-1/2 in
- Extra heavy duty aluminum holstertop with thick side plates
- Shoulder bolt and lock nut on top hinge, 4 solid aluminum rivets attach top to each front rail
- Slip resistant TRACTION-TRED® steps are single riveted and have extra wide knee braces
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- SPILL-PROOF® plastic pail shelf automatically closes with step ladder
- EDGE® bracing system helps to decrease damage to rail
- Molded external rail shield helps protect against abrasion damage
- Slip resistant foot pads attached to the EDGE® structure
- Plastic external rail shield helps protect against abrasion damage
- Every rivet backed up by metal, metal plates or washers to protect rails
- Optional manual pail shelf kit model no PK76-9 or automatic closing pail shelf kit model no 76-2
- 9 ft 7 in H maximum standing
- 16 ft H reach
- 7-1/4 x 14-7/8 in top
- 3-1/8 in front rails
- 1-3/16 in front flange
- 1-7/8 in rear rails
- 1-3/16 in rear flange
- 3 in steps
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113486 |
-
UNSPSC30191501
-
Includes(3) Tool Holes, (2) Drill Holes, (2) Tool Slots and Parts Tray
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
WERNER® 7312 7300 Type IAA Single Sided Step Ladder, 12 ft H Ladder, 375 lb Load, 11 Steps, Fiberglass
The 7312 fiberglass 12 ft step ladder has a duty rating of 375 pounds and features heavy duty aluminum HolsterTop. With a full set of horizontals and heavy duty internal spreaders, these ladders are built for the long haul. The molded external rail shields and the EDGE® bracing system help decrease damage to the rails. The slip resistant TRACTION-TRED® steps are single riveted and have extra wide knee braces. The Glas*Mark® violator stripes increase the visibility of the ladder on the jobsite. Fiberglass rails are non-conductive for working near electricity.
Browning® 1293661 Standard Cottered Roller Chain, 1-3/4 in Pitch, 1 in Dia x 1 in W Roller, Steel
Browning® 1293661 Standard Cottered Roller Chain, 1-3/4 in Pitch, 1 in Dia x 1 in W Roller, Steel
RIDGID® 46675 Hex Bolt, For Use With: Model 100A/150A/200A Machine Stand, Model 1206/1205 Stand, Model 916 Roll Groover and Model 918-I Integral Roll Groover, 3/8-16 x 2-3/4 in
RIDGID® 46675 Hex Bolt, For Use With: Model 100A/150A/200A Machine Stand, Model 1206/1205 Stand, Model 916 Roll Groover and Model 918-I Integral Roll Groover, 3/8-16 x 2-3/4 in
Irwin® 90172 901 General Purpose Silver & Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, M7 HSS
Irwin® 90172 901 General Purpose Silver & Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, M7 HSS
Browning® 1293455 Riveted Standard Duty Roller Chain, 10 ft OAL, 3/8 in Pitch, 0.2 in Dia x 3/16 in W Roller, Steel
All Browning® ANSI B29.1 roller chain is prestressed, a production operation that permanently seats the various chain components. Prestressing minimizes the chain stretch which often occurs with ordinary chain during the initial running period, thus avoids excessive early wear and reduces the need for take-up adjustment. Prestressing minimizes tolerance variations too, ensuring balanced loading among all parts and avoiding premature fatigue failure.
RIDGID® 72327 4 Pump Gun With Hose, For Use With: Model 402 Utility Oiler, #4
RIDGID® 72327 4 Pump Gun With Hose, For Use With: Model 402 Utility Oiler, #4
