WERNER 10' 375# 1-AA ALUMINUM STEPLADDERS WER 410
The 410 aluminum 10 ft step ladder has a duty rating of 375 pounds and features heavy gauge TOOL-TRA-TOP®. All steps are knee braced and the TRACTION-TRED® steps are slip resistant. The rear rail is a full U channel and a full set of rear horizontals are spaced one per foot. The 14 ft and 16 ft models carry a duty rating of 300 pounds.
-
BrandWERNER®
-
UPC051751010909
-
Manufacturer Part Number410
-
CountryUSA
-
Load Capacity375 lb
-
MaterialAluminum
-
TreadRibbed
-
TypeType IAA Single Sided
-
Series400
-
Base Spread67 in
-
Number of Steps9
-
Ladder Height10 ft
-
Bottom Width31-3/4 in
- Heavy gauge Tool-Tra-Top® with thick side plates
- Shoulder bolt and lock nut on top hinge, 4 solid aluminum rivets attach top to each rail
- All steps are knee braced
- Slip resistant TRACTION-TRED® steps are double riveted to rails for durability
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Full U-channel rear rails
- Full set of rear horizontals and spaced one per foot
- Slip resistant foot pad
- Optional molded pail shelf kit model no PK76-6
- 7 ft 8 in H maximum standing
- 14 ft H reach
- 7 x 14 in top
- 3-1/8 in front rails
- 1-1/8 in front flange
- 1-3/4 in rear rails
- 1 in rear flange
- 3 in steps
- Aluminum spreader
- 12-5/8 x 15 in W platform
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2113451 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.2 (2007)|OSHA Compliant
Recently Viewed
The 410 aluminum 10 ft step ladder has a duty rating of 375 pounds and features heavy gauge TOOL-TRA-TOP®. All steps are knee braced and the TRACTION-TRED® steps are slip resistant. The rear rail is a full U channel and a full set of rear horizontals are spaced one per foot. The 14 ft and 16 ft models carry a duty rating of 300 pounds.
WS-515X24-TUFR Dodge® 038224 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
WS-515X24-TUFR Dodge® 038224 WS Ball Bearing Wide Slot Take-Up Frame, 24 in Travel, 35-7/8 in OAL, 12 in W Base, 16-1/4 in L Bolt Center-to-Center, 10-1/4 in W Bolt Center-to-Center
1/4" X 1-3/4" HEX HEAD TAPPER SCREW
8-MM X 1.25X1" -OD HS DIE-PDTEP52080 >
Armstrong® 26-202 Regular Length Open End Wrench, 1-1/2 x 1-5/8 in Wrench, 15 deg Offset, 18-1/4 in L, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 26-202 Regular Length Open End Wrench, 1-1/2 x 1-5/8 in Wrench, 15 deg Offset, 18-1/4 in L, High Alloy Steel, Satin Chrome, ASME B107.6-1994
CHROME STEEL DUPLEX SWITCH WALLPLATE - JWH513210 >
