WERNER 10' 300# TYPE-1-A F/GLS STEPLADDER WER 6210
The 6210 Fiberglass 10 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751031942
-
Manufacturer Part Number6210
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread65-7/8 in
-
Number of Steps9
-
Ladder Height10 ft
-
Bottom Width30-3/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 89408363 |
| MSC | 89408363 |
| MSC | 89408363 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
The 6210 Fiberglass 10 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Morse® 397575 Heavy Duty Reciprocating Saw Blade, 4 in L x 1/2 in W, 32, Bi-Metal Body
Morse RBA432T25 (397575) 3", 32 tooth bimetal airsaw blade are specifically designed for use with pnewmatic saws. Used for thin sheet metal applications Primarily used for autobody and trailor modifications. Standard 1/2" wide blade with tapered point between body panels and under stripped/rusted fasteners. Twenty five (25) blades per package.
BELL® 5175-5 Weatherproof Blank Cover, 4-1/2 in L x 4-1/2 in W, Die Cast Aluminum
BELL® 5175-5 Weatherproof Blank Cover, 4-1/2 in L x 4-1/2 in W, Die Cast Aluminum
P® Paintstik® is designed for use in pickling baths or galvanizing operations. The marks completely remove and will not interfere with the zinc coating.
Klein® 87409 Deceleration Unit, 20 in L, Nylon Line, Snap Anchorage Connection, Snap Hook Harness Connection Hook, ANSI Specified, CSA Certified
Klein® 87409 Deceleration Unit, 20 in L, Nylon Line, Snap Anchorage Connection, Snap Hook Harness Connection Hook, ANSI Specified, CSA Certified
HOLESAW ARBORS-MORM55P >
