WERNER 4' 375# 1-AA P/FORM F/G STEPLADDER WER P-7404
The P7404 fiberglass 4 ft platform ladder has a rating of 375 pounds and maintains a full set of horizontals on the rear sections. The large work platform provides a secure and comfortable work area while the EDGE® bracing system and external rails shields add to the durability of the product. The safety guard rail at the top of the ladder encourages proper ladder use. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751011401
-
Manufacturer Part NumberP7404
-
CountryUSA
-
Load Capacity375 lb
-
Platform Depth14-5/8 in
-
Platform Width14-5/8 in
-
MaterialAluminum External Rail Shield/Fiberglass
-
TypeType IAA
-
SeriesP7400
-
Base Spread42 in
-
Ladder Height4 ft
-
Step Depth3 in
-
Bottom Width27 in
- Safety guard rail encourages proper ladder use
- Back up plates reinforce all top connectors
- Large platform provides secure and comfortable work area
- Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each front rail
- Full set of rear horizontals spaced one per foot
- Slip resistant TRACTION-TRED® extra wide steps are knee braced and double riveted
- EDGE® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Glas*Mark® violator stripes on rails allow ladder to be more visible
- Aluminum external rail shield helps protect against abrasion damage
- Slip resistant foot pads attached to the EDGE® structure
- 4 ft H to platform
- 10 ft H reach
- 3 ft 10 in H maximum standing
- Features can hook
- 6 ft L closed
- 3-1/8 in front and 1-7/8 in rear rail
- 1-3/16 in front and rear flanges
-
UNSPSC30191506
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The P7404 fiberglass 4 ft platform ladder has a rating of 375 pounds and maintains a full set of horizontals on the rear sections. The large work platform provides a secure and comfortable work area while the EDGE® bracing system and external rails shields add to the durability of the product. The safety guard rail at the top of the ladder encourages proper ladder use. Fiberglass rails are non-conductive for working near electricity.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
CONSOLIDATED BRG BK-2030 BK Closed End Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 2 Rows, 30 mm W
CONS BK-2030 BK Closed End Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 2 Rows, 30 mm W
Milwaukee® 0299-20 Grounded Heavy Duty Electric Drill, 1/2 in Keyed Chuck, 120 V AC, 0 to 850 rpm Speed, 12-13/64 in OAL
Outperforms all other 1/2 in. drills in its category. The 1/2 in. magnum® drill has the power and construction to deliver long-lasting performance. The all-metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, textured grip and two-finger trigger optimize user comfort and balance.
Leviton® 5262-IG Heavy Duty Isolated Ground Straight Blade Duplex Receptacle, 125 V AC, 15 A, 2 Poles, 3 Wires, Orange
Leviton® extra heavy-duty industrial grade series receptacles withstand the rigors of the harshest environments, such as those found in factories, schools and municipal buildings. These specification grade devices are the best choice where durability, safety and reliability are of utmost importance.
Morse® Metal Devil NXT™ 101387 Metal Devil NXT™ Circular Saw Blade, 8 in Dia x 0.063 in THK, 5/8 in Arbor, Hardened Steel Blade, 42 Teeth
Morse® Metal Devil NXT™ 101387 Metal Devil NXT™ Circular Saw Blade, 8 in Dia x 0.063 in THK, 5/8 in Arbor, Hardened Steel Blade, 42 Teeth
