WERNER® 7124-2 7100-2 Round Rung Extension Ladder, 24 ft OAL, 375 lb Load, 12 in Adjustable Increments, Fiberglass, Type IAA
The 7124-2 fiberglass 24 ft extension ladder is made with non-conductive fiberglass side rails featuring TRACTION-TRED® slip resistant round rungs. The top of the fly section has pre-pierced holes for easy installation of accessories. Guides at the top of the base and internal guides at bottom of fly section securely interlock the rails. The plate and rung assemblies are riveted at four points to the side rails. The base and fly sections separate easily to use base section as a single ladder. Durable rail shield and shoe brackets protect rails from damage. These durable ladders boast a duty rating of 375 pounds.
-
BrandWERNER®
-
UPC051751012682
-
Manufacturer Part Number7124-2
-
CountryUSA
-
Load Capacity375 lb
-
MaterialFiberglass
-
Rail TypeNon-Conductive/Interlocking
-
Maximum Working Length21 ft
-
TypeRound Rung
-
ANSI CodeType IAA
-
Adjustable Increments12 in
-
Section Length12 ft
-
Series7100-2
-
Shoe TypeSwivel
-
Outside Shoe Base Width19 in
-
Overall Length24 ft
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-1/4 in slip resistant TRACTION-TRED® round rungs
- Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement
- Smooth operating pulley with polypropylene rope
- Interlocking side rails with nylon coated internal rail guides on bottom of fly section increase ease of operation
- External guides at top of base section securely interlock rails
- Base and fly separate easily to use base section as single ladder
- Rugged, heavy duty extruded rung locks are spring loaded to operate smoothly
- Pre-pierced holes for easy field installation of accessories
- Durable rail shield and shoe bracket protects rail from damage
- Dual action feet with slip resistant pad and spur plate for use on hard or penetrable surfaces
- Mar resistant molded end caps
- Ideal for utility and telecommunication industries
- Shoe with slip resistant pad and spur plate
- 23 ft H reach
- 21 ft L maximum open extended
- Slip resistant pad foot material
- 2 sections
- 12 ft L approximate closed
- 3-5/16 in rails
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113563 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
WERNER® 7124-2 7100-2 Round Rung Extension Ladder, 24 ft OAL, 375 lb Load, 12 in Adjustable Increments, Fiberglass, Type IAA
The 7124-2 fiberglass 24 ft extension ladder is made with non-conductive fiberglass side rails featuring TRACTION-TRED® slip resistant round rungs. The top of the fly section has pre-pierced holes for easy installation of accessories. Guides at the top of the base and internal guides at bottom of fly section securely interlock the rails. The plate and rung assemblies are riveted at four points to the side rails. The base and fly sections separate easily to use base section as a single ladder. Durable rail shield and shoe brackets protect rails from damage. These durable ladders boast a duty rating of 375 pounds.
1/2" X 36" REDI-CUT BLACK PIPE IS THREADED AND HAS THREAD PROTECTOR AT BOTH ENDS. THIS PIPE IS AVAILABLE ON DIRECT ORDERS IN GALVANIZED OR BLACK PIPE. SIZES AVAILABLE ARE 3/8" TO 2" IN 18" TO 60" LENGTHS IN 6" GRADUATIONS-JWH410120 >
Thomson® Super Smart Ball Bushing® SSU12OPN Adjustable Open Linear Bearing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
DeWALT® Powers® 50096-PWR Standard Flat Head Drive Pin, 0.145 in Dia x 2 in L Shank, 0.3 in Dia Head
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
MOP OR BROOM HOLDER-JWH601432 >
Powers™ TempTAP™ 115 Traditional Standard Lavatory Faucet, 1 Handles, 2 gpm Flow Rate
Series 105 and 115 TempTAP™ thermostatic faucets feature an advanced thermal actuator to provide the latest in thermal protection. The single-lever cartridge, with integral ceramic discs, provides both temperature and volume control. TempTAP™ automatically mixes hot and cold water to deliver pre-set water within a specific range. In the event of cold water failure, the thermal actuator virtually shuts off the flow of hot water. TempTAP™ is listed to ASSE 1070, IAPMO cUPC, and NSF 61 Section 9 Annex G.
