WERNER 28' 300# 1-A F/GLS EXT/LADDERS WER D-6228-3
The D6228-3 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6228-3 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
-
BrandWERNER®
-
UPC051751110548
-
Manufacturer Part NumberD6228-3
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Rail TypeNon-Conductive/Interlocking
-
Maximum Working Length25 ft
-
TypeD-Rung Multi-Section
-
ANSI CodeType IA
-
Adjustable Increments12 in
-
Section Length11 ft
-
SeriesD6200-3
-
Outside Shoe Base Width18-3/4 in
-
Overall Length28 ft
- Compact 3 section design is 11 ft 4 in When closed
- Conventional 28 ft extension ladder is 14 ft 3 in When closed
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-5/8 slip resistant TRACTION-TRED® D-rungs
- Interlocking side rails with internal rail guides on bottom of fly section securely connect rails
- External guides at top of base section securely interlock rails
- Heavy duty extruded rung locks are spring loaded to operate smoothly
- Combination rail shield bracket and shoe with SHU-LOK® and slip resistant pad
- Molded rung braces on bottom step for increases durability
- Mar resistant molded end caps
- Ladder is considered 31 ft by ANSI standards
- 27 ft H reach
- 25 ft L maximum open extended
- Slip resistant pad foot material
- 3 sections
- 11 ft L approximate closed
- 3-5/16 in rails
- 1-3/16 in flange
- 1-5/8 in rung
- 17-3/4 in W fly
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113608 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The D6228-3 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6228-3 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
The Master Lock® 1456E410 personal lockout pouch, electrical, features a zippered pouch that is easy to carry or wear with an adjustable waist strap. Kit includes a Master Lock® 410RED Zenex™ Thermoplastic padlock and electrical lockout focused high use products such as circuit breaker lockouts. Ideal for individual workers.
The Crescent Nicholson half-round needle files with a knurled handles are perfect for fine toolmakers, watchmakers, diemakers, or even jewelers who need precise filing ability.
#20 RAYON MOPHEADS-FLOP20>
Sealmaster 2-15/16"-ID 4-BOLT TRB FLANGE UNIT SEA RFB-215
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
United Abrasives-SAIT 23067 Thin High Speed Cut-Off Wheel, 4 in Dia x 1/16 in THK, 1/4 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
