WERNER 24' 250# TY-1 F/GLS EXT/LADDERS WER D-6024-2
The D6024-2 24 ft fiberglass extension ladders have non-conductive side rails and a duty rating of 250 pounds. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The rail shields protect the bottom of the rail and the SHU-LOK® shoe pivots easily for use on hard or penetrable surfaces. The exclusive ALFLO® rung joint guarantees TWIST-PROOF® performance.
-
BrandWERNER®
-
UPC051751028577
-
Manufacturer Part NumberD6024-2
-
CountryUSA
-
Load Capacity250 lb
-
MaterialFiberglass
-
Rail TypeNon-Conductive/Interlocking
-
Maximum Working Length21 ft
-
TypeD-Rung Multi-Section
-
ANSI CodeType I
-
Adjustable Increments12 in
-
Section Length12 ft
-
SeriesD6000-2
-
Shoe TypeSwivel
-
Outside Shoe Base Width18-1/8 in
-
Overall Length24 ft
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-1/2 in slip resistant TRACTION-TRED® D-rungs
- Smooth operating pulley with polypropylene rope
- Interlocking side rails with internal rail guides on bottom of fly section securely connect rails
- Durable extruded rung locks are spring loaded to operate smoothly
- External guides at top of base section securely interlock rails
- Combination rail shield bracket and shoe with SHU-LOK® and slip resistant pad
- Internal guides on bottom of fly section securely interlock rails
- Molded rung braces on bottom step for increases durability
- Mar resistant molded end caps
- 23 ft H reach
- 21 ft L maximum open extended
- Slip resistant pad foot material
- 2 sections
- 12 ft L approximate closed
- 3-3/8 in rails
- 1-3/16 in flange
- 1-1/2 in rung
- 15-3/4 in W fly
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2113602 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The D6024-2 24 ft fiberglass extension ladders have non-conductive side rails and a duty rating of 250 pounds. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The rail shields protect the bottom of the rail and the SHU-LOK® shoe pivots easily for use on hard or penetrable surfaces. The exclusive ALFLO® rung joint guarantees TWIST-PROOF® performance.
APPLICATOR TOOL DISPENSING VALVE-LOC98009 >
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
HCI Preferred Supplier 620016 Band Clamp, 11/16 to 1-1/2 in Nominal, 60 mm THK, 301 Stainless Steel
HCI Preferred Supplier 620016 Band Clamp, 11/16 to 1-1/2 in Nominal, 60 mm THK, 301 Stainless Steel
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
