Rubbermaid 1-CU/YD FORKLIFTABLE TILT TRUCKS RBM 1315-42-BLA
The BRUTE Forkliftable Tilt Truck offers industrial strength construction to transport heavy loads up to 1,250 lbs. These dump trucks feature the DuraTilt™ frame that allows one user to dump and clean the tilt truck, and reinforced corner points that helps prevent scraping, and paint transfer onto the ground during dumping.
-
BrandRubbermaid®
-
UPC086876179644
-
Manufacturer Part NumberFG131542BLA
-
CountryUSA
-
Load Capacity1250 lb
-
Caster TypeSwivel
-
MaterialHDPE
-
ColorBlack
-
TypeRotational Molded Standard Duty
-
Volume Capacity1 cu-yd
-
Overall Height43.8 in
-
Overall Length72.2 in
-
Overall Width33-1/2 in
- DURATILT FRAME - Allows the Tilt Truck to stay stable while in the tilted position making the dumping and cleaning process easier than traditional metal frames
- REINFORCED PROTECTION - Reinforced corner points help prevent rusting of the frame, scraping and paint transfer onto the ground during dumping
- HEAVY LOADS - Made of rotomolded resin, offers industrial strength construction to transport heavy loads up to 1,250 lbs
- LEAKPROOF BODY - Polyethylene bottom body supported by steel frame
- Up to the height of the bottom of the handle
- EASY TO CLEAN - Smooth surface is easy-to-clean and resists pitting and corroding
- FLEXIBLE MOVEMENT - 5 in swivel caster and 12 in inset wheels for smooth handling and maneuverability
- SUITED FOR THE JOB - Crafted of durable rotomolded plastic and forkliftable model is fully compatible with forklifts and automated lifters
-
UNSPSC24101510
-
Package DescriptionUNIT
-
Specification Sheet
Recently Viewed
The BRUTE Forkliftable Tilt Truck offers industrial strength construction to transport heavy loads up to 1,250 lbs. These dump trucks feature the DuraTilt™ frame that allows one user to dump and clean the tilt truck, and reinforced corner points that helps prevent scraping, and paint transfer onto the ground during dumping.
Crown® by Aervoe® 7007G Cold Galvanizing Compound, 1 gal Container, Bulk Liquid Form, Light Gray, 48 sq-ft/can Coverage, 24 hr Curing
Crown's premium Cold Galvanize Coating 93% zinc Rich provides corrosion protection to ferrous metal surfaces; first as a long lived coating of practically pure zinc comparable to that obtained by galvanization and second, through sacrificial anodization. Both aerosol and bulk use metallic zinc dust that is 97% pure, which leaves 93% zinc in the dry film. The zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing. This protection becomes effective when the surface is scratched, broken, or corrupted. With the presence of moisture the zinc coating will corrode while continuing to protect the metal it covers.
IKO BA2012ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/4 in Dia Bore, 1-1/2 in OD, 1 Row, 3/4 in W, 15700 N Dynamic/29600 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Browning 1-3/16"-ID 2-BOLT TRB PILLOW BLOCK BRW PBE-920 X 1.3/16
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
The Klein 87906 Leather Cushion Belt Pad is four-Inches wide and 30-Inches long. It is a thick leather back with four snap-open straps for easy attachment to any belt up to 2-Inch wide. The belt pad is durable and comfortable to wear, especially for prolonged work periods.
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
