Dodge® 117173 Stock Bore Taper Lock Bushing, 1-15/16 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475493104
-
Manufacturer Part Number117173
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating11600 in-lb
-
TypeStock Bore
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Hub Diameter4.38 in
-
Barrel Diameter3.38 in
-
Keyway Size1/2 x 1/4 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter1-15/16 in
-
Overall Length1-3/4 in
- Size 2517 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number2517 X 1-15/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Dodge® 117173 Stock Bore Taper Lock Bushing, 1-15/16 in Dia Bore, 3.38 in Dia Barrel, 1-3/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
40-B-14-F-3/4 14 Tooth Sprockets For #40
14 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B14F3/4 >
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
2" MEDIUM SHURBRITE DISCS-SUP10545>
40-B-19-F-3/4 19 Tooth Sprockets For #40
19 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B19F3/4 >
Milwaukee® 49-12-0305 Type 1 Sander Guard, For Use With Milwaukee® 6081-20 Sanders
Milwaukee® 49-12-0305 Type 1 Sander Guard, For Use With Milwaukee® 6081-20 Sanders
