5-TON 20'-LIFT HAND CHAIN HOISTS JET101952
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
-
BrandJET®
-
UPC731325219012
-
Manufacturer Part NumberJT9-101952
-
CountryUSA
-
Load Capacity5 ton
-
Pull to Lift Rated Load90 lbf
-
TypeContractor Grade
-
SeriesS90
-
Brake TypeDual Pawl Weston
-
Lifting Height20 ft
- Durability, Weston style dual pawl brake system double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments
- Grade 80 black oxide coated load chain for durability
- Impact resistant covers that provide durability and protection
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Smaller body and lightweight design for low headroom applications and use in confined areas
- 178 ft hand chain overhaul to lift load 1ft
- 2 falls
- 23-1/2 in headroom
- 10 x 30 mm load chain
-
Alternative Part Number101952
-
UNSPSC24101600
-
Standards/ApprovalsANSI/ASME B30.16 and HST-2 Standards|OSHA Regulations
Recently Viewed
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/5VX1700 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 170 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
2.000" X 2.623" X .313" DOUBLE LIP OIL SEAL -CHI19777 >
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/3VX950 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 95 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
HCI Preferred Supplier 18124B 90 deg Union Elbow, 1/4 in Nominal, Compression End Style, CA360 Brass
HCI Preferred Supplier 18124B 90 deg Union Elbow, 1/4 in Nominal, Compression End Style, CA360 Brass
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
