Electric Hoists
2-TON L-90 15'-LIFT CHAIN HOIST
20-TON L-100 20'-LIFT CHAIN HOIST
3/4-TON 5'-LIFT INDUSTRIAL PULLER-JET205675 >
2-1/2-TON JLH 5'-LIFT LEVER HOIST - JET225005>
6-TON JLH 15'-LIFT LEVER HOIST - JET260015>
6-TON JLH 20'-LIFT LEVER HOIST - JET260020>
3-TON 10' LIFT CHAIN HOIST
JLH320-10PSH 3.2-TON 10'-LIFT ANTI-LOAD HOIST
3-TON L-90 10'-LIFT CHAIN HOIST
3/4-TON 20'-LIFT LEVER HOIST
3/4-TON 5-FT-LIFT JPNX PULLER-DISC
1-TON JLH 10'-LIFT LEVER HOIST - JET310010>
2-1/2-TON JLH 10'-LIFT LEVER HOIST - JET325010>
9-TON JLH 5'-LIFT LEVER CHAIN HOIST - JET460005>
5-TON 20' LIFT CHAIN HOISTS
5-TON 20'-LIFT HAND CHAIN HOIST
5-TON 10'-LIFT ELECTRIC CHAIN HOIST - JET531000>
5-TON 15'-LIFT ELECTRIC CHAIN HOIST - JET531500>
50' STEEL-FRAMED ROPE HOIST - JWH703233 >
1-TON 72" POWER PULL CABLE HOISTS-AME72>
2-TON POWER PULL CABLE HOIST 6'-AME72A >
1/2-TON HAND CHAIN HOISTS-HRHCF00510>
1-TON HAND CHAIN HOISTS-HRHCF01010>
CM® ShopStar® 2000 Single Reeving Electric Chain Hoist, 300 lb Load, 6-1/2 ft Chain/Rope, 10 ft H Lifting, 1/6 hp Power Rating, 115 V AC
The CM® ShopStar® electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads.
Recently Viewed
10-MALE JIC HYDRAULIC PLUG-DAY240810 >
GEARWRENCH® 81669 Long Length Open End Combination Wrench, 12 mm Wrench, 12 Points, 15 deg Offset, 197 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Southwire® Romex® SIMpull® 63949202 Type NM-B Non-Metallic Sheathed Cable With Ground Wire, Coil Packaging, 600 V AC, (3) 8 AWG Copper Conductor, 125 ft L, Black
Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
3/8" HEAVY DUTY STAPLES - JWH303186 >
Stanley Proto J5441-7 1/2-Inch Drive Hex Bit Set, 7-Piece-PROJ54417
16-MALE JICX16-MALE JIC HYDRAULIC ADAPTER-DAY240316 >
