260020 JET EQUIPMENT AND TOOLS
6-TON JLH 20'-LIFT LEVER HOIST - JET260020>
Recently Viewed
6-TON JLH 20'-LIFT LEVER HOIST - JET260020>
Square D™ QO™ PK9GTA Equipment Ground Bar Assembly, For Use With QO™ Load Center and Type PK Circuit Breaker, 2-Screw, 14 to 10 AWG Copper, 12 to 10 AWG Aluminum Cable Size, 12-Circuit
By grounding the system, it helps prevent electrical shock hazards and ensures that stray electrical currents are safely directed to the earth. It acts as a centralized location where all ground wires from branch circuits are securely connected. It provides a neat and organized way to terminate multiple ground conductors, making the panel easier to inspect and maintain. This is a Ground Lug kit compatible for both QO and Homeline Load Center. It has 9 number of circuits which accepts (1) 14 4 or (2) 14 or 12AWG copper or (1) 12 4 or (2) 12 or 10AWG aluminum.
1-1/4" STEEL PIPE CUTTER WHEEL-EGO7010105>
Mayhew™ 10502MAY Half Round Chisel, Cape, 1/4 in Tip, 5-3/4 in OAL
CROSBY 01-09359 419 Light Champion Snatch Block With Shackle, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 10 in OD
Working Load Limit: 8 metric tons (17,600 lbs). Sheave Diameter: 10 inches with a single sheave count. Wire Rope Capacity: Designed for 5/8" to 3/4" wire rope diameters. Safety Design Factor: Built with a 4:1 safety factor. Product Weight: Approximately 42 to 43 lbs. Bearing Type: Heavy-duty roller bearings.
GEARWRENCH® 85065 Micrometer Torque Wrench, 3/4 in Drive, 100 to 600 ft-lb, Ratcheting Head, 2.5 ft-lb Graduation, 42.4 in OAL, ASME B107.300
The GEARWRENCH® family of torque wrenches and torque products offer the latest innovations in torque measurement. The line includes micrometer, tire shop, beam, and electronic torque wrenches and torque multipliers. The micrometer wrenches come available in fixed head and flex head. The fixed head line offers wrenches in 1/4 to 3/4 in drives. The flex head wrenches are available in 3/8 in and 1/2 in drive sizes. The tire shop wrenches feature a rugged tire tread rubber cover on the head intended specifically for checking wheel lug nuts and are available in 3/8 in and 1/2 in drive sizes. The electronic torque wrenches ensure a precise fastener torque level and are available in either 3/8 in and 1/2 in drives. The GEARWRENCH® line of torque products allow you to complete any job where accurate torque is required.
