460005 JET EQUIPMENT AND TOOLS
9-TON JLH 5'-LIFT LEVER CHAIN HOIST - JET460005>
Recently Viewed
9-TON JLH 5'-LIFT LEVER CHAIN HOIST - JET460005>
Dichtomatik N70438 O-Ring, 438 Dash Number, 6.225 in ID x 6.775 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
38-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-38-F-1-1/2
38 TOOTH SPROCKETS FOR #40 CHAIN
Drillco 51A216E 5100A Imperial Multi-Flute Non-Center Cutting Regular Length Single End Finishing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 7/8 in Dia Shank, 4-1/2 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
40-B-35-F-1-1/2 35 Tooth Sprockets For #40
35 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B35F11/2 >
40 TOOTH SPROCKETS FOR #50 CHAIN
