1/2-TON 5'-LIFT HAND LEVER HOISTS JET181505
1/2-TON JLH 5'-LIFT LEVER HOIST
Recently Viewed
1/2-TON JLH 5'-LIFT LEVER HOIST
200-AMP BRASS GROUND CLAMPS 5 inch (127 mm) long with 3/4 inch (19.1 mm) jaw opening.
WATTS® 0123496 Swing Check Valve, 1 in Nominal, Threaded x Solder End Style, Low Lead Compliance: Yes, Metal, Brass Body, Import
This 1 inch lead free swing check valve is used to prevent reverse flow in water and steam applications. It features a lead free brass body with NPT threaded end connections, lead free brass bonnet, PTFE gasket, lead free brass pin, screw and seat. This valve has metal-to-metal seating and provides low pressure drop and automatic closure when fluid flow is stopped. The working set pressure rating is 125 psi (8.6 bar) and maximum pressure is 200 psi (13.8 bar) WOG non-shock.
Proto® J5336CF Crowfoot Wrench, Imperial, 1-1/8 in Wrench, 1/2 in Drive, 3 in OAL, ASME B107.21, Full Polished
CFL 2-pin pre-heat replacement light bulbs are an energy efficient alternative to traditional incandescents with the same light output. These bulbs last up to 10 times longer and use 75% less energy than an equivalent incandescent light bulb. To help you find the right bulb for the right application, see Westinghouse full offering of CFL 2-pin replacement light bulbs available in a variety of wattages and colors. These 2-pin replacement CFLs are for general illumination applications with fixtures that have the correct designated ballasts everything from recessed or down lights to wall sconces and outdoor lights. These light bulbs contain mercury. Dispose of according to local, state or federal laws.
NIBCO 62-103-01 Standard In-Line Ball Cone Check Valve, 1/2 in Nominal, FNPT End Style, 1.4 gpm Flow Rate, Stainless Steel Body, Domestic
The 62-100 series is uniquely suited for applications in corrosive environments, including chemical processing, pulp and paper and other process industries. The rugged stainless steel body and RPTFE ball check provide reliable, patented protection against reverse flow.
