MORSE C/Tool 13/32" X 10"-LENGTH HSS DRILLBITS MCT 10957
MORSE® 10957 1315 Extra Length Drill, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 10 in OAL, HSS
-
BrandMORSE®
-
UPC686125109578
-
Manufacturer Part Number10957
-
CountryUSA
-
FinishBright
-
Point Angle118 deg
-
Point TypeNotched
-
MaterialHSS
-
Flute Length7-1/2 in
-
Flute TypeStandard
-
Series1315
-
Cutting Depth7-1/2 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialHSS
-
Shank TypeStraight
-
Drill Size - Decimal Inch0.4062 in
-
Drill Size - Fraction13/32 in
-
Overall Length10 in
- Recommended for general purpose drilling in applications where extra reach is required
-
UNSPSC23241606
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 10957 1315 Extra Length Drill, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 10 in OAL, HSS
Milwaukee® 48-20-5160 Heavy Duty Thick Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5175 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
#6 X 3/4" Flat Head Phillips Wood Screw
MORSE® 32730 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
150-WATT CLEAR BULBS 1652-B-BUL150ACL >
The Crosby G-414 5/8" is a hot-dip galvanized, extra heavy-duty wire rope thimble designed to protect wire rope eyes from wear, crushing, and deformation. Manufactured by The Crosby Group, it is a non-load-bearing rigging component used to maintain the shape of a loop or eye in a wire rope assembly under tension.
