Peerless 5/16" GRADE-80 CLEVIS GRAB HOOK PEE 8428280
The Peer-Lift® clevis cradle grab hook is an excellent choice for overhead lifting and is also suitable for other applications. The whole chain link is supported by the cradle, therefore keeping 100% of its working load limit. A reliable choice, proof tested at twice the working load limit and fatigue tested at 1.5X the working load limit for 20000 cycles. It meets or exceeds ASTM A952 and OSHA 1910 standards. Applications include chain tightening, tie down and lifting in industries such as construction, automotive, aircraft and farming.
-
BrandPeerless
-
Manufacturer Part Number8428280
-
CountryUSA
-
Load Capacity4500 lb
-
FinishPowder-Coated
-
MaterialAlloy Steel
-
Grade80
-
Attachment TypeClevis
-
Suitable For Use With9/32 to 5/16 in Chain Sling
-
UNSPSC31162603
-
Package DescriptionEACH
-
Standards/ApprovalsASTM A952|Fatigue Tested at 1.5 Times the Working Load Limit for 20000 Cycles|OSHA 1910|Proof Tested at Twice the Working Load Limit|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
-
Warranty12 Months
-
Catalog
-
Specification Sheet
Recently Viewed
The Peer-Lift® clevis cradle grab hook is an excellent choice for overhead lifting and is also suitable for other applications. The whole chain link is supported by the cradle, therefore keeping 100% of its working load limit. A reliable choice, proof tested at twice the working load limit and fatigue tested at 1.5X the working load limit for 20000 cycles. It meets or exceeds ASTM A952 and OSHA 1910 standards. Applications include chain tightening, tie down and lifting in industries such as construction, automotive, aircraft and farming.
SASH LOCK BRITE BRASS-NTL148684 >
#505-BC 2-1/2" PLAIN STEEL HINGES-NTL140418 >
Dodge® Tigear-2® 20Q15HA56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Hollow Shaft Output, 1.69 hp, 15:1 Gear, 117 rpm Maximum Output, 790 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
12-24" X 3/4" Flat Head Slot Machine Screws
National Hardware® N127-878 Heavy Duty Strap Hinge, Hot Rolled Steel, Zinc Plated
