Walter Surface Technologies
Drillco 31E120BC 3100E Adjustable Round Split Die, M12x1.25 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E110BB 3100E Adjustable Round Split Die, M11x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100DB 3100E Adjustable Round Split Die, M10x1.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E100CB 3100E Adjustable Round Split Die, M10x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E090BB 3100E Adjustable Round Split Die, M9x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080CB 3100E Adjustable Round Split Die, M8x1.25 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E080BB 3100E Adjustable Round Split Die, M8x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E070BB 3100E Adjustable Round Split Die, M7x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060CB 3100E Adjustable Round Split Die, M6x1 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E060BB 3100E Adjustable Round Split Die, M6x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E050BB 3100E Adjustable Round Split Die, M5x0.8 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E045BB 3100E Adjustable Round Split Die, M4.5x0.75 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040BB 3100E Adjustable Round Split Die, M4x0.7 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E040AB 3100E Adjustable Round Split Die, M4x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E035BB 3100E Adjustable Round Split Die, M3.5x0.6 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E030AB 3100E Adjustable Round Split Die, M3.0x0.5 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 31E025AB 3100E Adjustable Round Split Die, M2.5x0.45 Thread, 1 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E124CC 3000E Adjustable Round Split Die, 3/8-16 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
Drillco 30E120CC 3000E Adjustable Round Split Die, 5/16-18 UNC Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
DRILLCO 300N29 Screw Machine Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
Drillco 300LH11 Screw Machine Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 135 deg Drill Point Angle, 11 Pieces, M42 Cobalt HSS, Oxide Treated
M42 Cobalt High Speed Steel for super abrasive resistance in tough metals. Used in left hand screw machines and with screw extractors. Can be used to drill out broken bolts and other hardened fasteners. 11pc set in rollup pouch.
Drillco 300A132 Type C Heavy Duty Stub Length Screw Machine Length Drill, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
Drillco 300A128 Type C Heavy Duty Stub Length Screw Machine Length Drill, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, HSS, Oxide Treated
Screw Machine (Stub) length drills offering greater stability than longer drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point.
Recently Viewed
Deep groove ball bearing
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
DOUBLE OPEN FACE BALL BEARING - SKF6406>
Bore (Inner) Diameter: 40 mm Outside Diameter: 90 mm Width (Thickness): 23 mm Basic Dynamic Load Rating: 42.3 kN Basic Static Load Rating: 24 kN Limiting Speed: Up to 11,000 RPM (depending on variant and lubrication) Weight: 637 grams
DOUBLE OPEN FACE H/D BALL BEARINGS
DOUBLE SEALED BALL BEARINGS-GEN62072RS>
