Drillco 31E180BC 3100E Adjustable Round Split Die, M18x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
-
BrandDrillco
-
UPC045996996852
-
Manufacturer Part Number31E180BC
-
CountryUSA|Canada
-
FinishBright
-
Thread DirectionRight
-
MaterialHSS
-
Thread SizeM18x1.5
-
Measurement SystemMetric
-
TypeAdjustable
-
Series3100E
-
Die Outside Diameter1-1/2 in
- Adjustable screws for microadjustment to fit slightly different diameter sizes
- Bright finish for smooth operation
- Outer Diameter is designed to be used with Drillco die stocks
- Outer Diameter is designed to be used with Drillco die stocks
-
UNSPSC27112805
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 31E180BC 3100E Adjustable Round Split Die, M18x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
ShearTap™ 34462 2091 Oversized Spiral Flute Tap, Right Hand Cutting, #10-32 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Black Steam Oxide, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Gates® Power Transmission Tri-Power® BX90 Cogged Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 93 in L Outside, 13/32 in THK, EPDM
Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance.
MORSE® 61276 2089MC High Performance Spiral Flute Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 61276 2089MC High Performance Spiral Flute Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
Drillco 25A232B 2500 Straight Flute Tap, Right Hand Cutting, 1-1/2-8 Thread, Bottoming Chamfer, 4 Flutes, Bright, HSS
8-pitch taps are ideal for use in the oil field, gas exploration equipment, and power generation plants. These taps are of larger diameters with standard sizes up to 4" in diameter.
MORSE® 11447 1332 General Purpose Jobber Length Drill Bit, B Drill - Letter, 0.238 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11447 1332 General Purpose Jobber Length Drill Bit, B Drill - Letter, 0.238 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
