Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
-
BrandDrillco
-
UPC045996996661
-
Manufacturer Part Number31E100DC
-
CountryUSA|Canada
-
FinishUncoated
-
Thread DirectionRight
-
MaterialHSS
-
Thread SizeM10x1.5
-
Measurement SystemMetric
-
TypeAdjustable
-
Series3100E
-
Die Outside Diameter1-1/2 in
- Adjustable screws for microadjustment to fit slightly different diameter sizes
- Bright finish for smooth operation
- Outer Diameter is designed to be used with Drillco die stocks
- Outer Diameter is designed to be used with Drillco die stocks
-
UNSPSC27112805
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 31E100DC 3100E Adjustable Round Split Die, M10x1.5 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
1-1/2" X 2" YEL XH RECT DIE SPRING-LANSEHR1500200>
GEARWRENCH® 3886 Tap and Die Set, 40 Pieces, M3x0.5 to M12x1.75 Tap Thread, M3x0.5 to M12x1.75 Die Thread, BSP/UNC/UNF Thread, Hexagon Die
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
Dichtomatik N70108 O-Ring, 108 Dash Number, 0.237 in ID x 0.443 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1.653X2.283X.393 OIL SEAL-CHI16498 >
15-T SPROCKET FOR #60 CHAIN-BRWH6015X11/4>
