Reliance Worldwide Corporation

This is a CxC (Cup x Cup) coupling with rolled stop designed for use in commercial and residential systems. It is mainly utilized as an above the ground fitting to join and solder water supply piping. This straight coupling is built of copper with sweat sockets on both ends to create a union between 1/2 in. ID (5/8 in. OD) straight lends of a pipe. This copper fitting meets NSF standards and complies with Lead-Free law for safe water drinking.

The Eastman Slip-Joint Washer is constructed of a high-impact polyethylene plastic for a long-lasting durability. The white washer measures 1-1/2-IN. Designed for use in tubular drain applications, the washer works in conjunction with a slip-joint nut (not included) to seal the connection between PVC pipes to prevent leakage. Sold and priced 100 per order.

The PI Range of inch-size push-in fittings is offered for tube sizes 5/32 to 5/8 in OD. The fittings are manufactured in gray acetal copolymer with food grade nitrile O-Ring, making them especially suitable for applications involving foodstuff and potable liquids. They are also suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum.

ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

Slip connectors are the fastest and easiest way to repair a burst or damaged pipe. For repairs to Cooper, PEX or CPVC. Incorporates Twist-to-Lock feature for added security. Damaged section of the pipe is removed, the slip end slides completely over one side of pipe and then is connected to the other section of pipe. Fast and easy to use - does not need tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

The JG CTS Shut-off valve ensures an immediate water supply cut-off with a simple turn of the valve handle. The valve is designed to work with both copper and Speedfit plastic pipe. To lock the pipe in place, simply push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.

The JG CTS Shut-off valve ensures an immediate water supply cut-off with a simple turn of the valve handle. The valve is designed to work with both copper and Speedfit plastic pipe. To lock the pipe in place, simply push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing

SharkBite Push-to-Connect x Female Pipe Thread Water Heater Connection Kit is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.

Sharkbite® Angle Stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures, and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.

Sharkbite® Straight Stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures, and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.

SharkBite® U280 Elbow 1/2 in MNPT x 1/2 in. The Elbow allows you to easily add another line off of existing plumbing. It can be used to connect to CPVC, copper or PEX tubing. Simply cut the pipe and push on the fitting. SharkBite® fittings can easily be removed and are reusable.

SharkBite's Braided Flexible Water Heater Connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection on the connector to the nipple and tighten with channel locks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve.

SharkBite's Braided Flexible Water Heater Connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection on the connector to the nipple and tighten with channel locks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve.

SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.

SharkBite's Threaded Adapters are FNPT on one end, and allow the user to connect any appropriately sized SharkBite push-to-connect fitting on the other end. To connect the SharkBite fitting, simply push the copper tube size (CTS) end into the SharkBite fitting. This fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.