Regal Rexnord

Browning® 1303296 Insert, JS6/JS6P Coupling, 3.487 in OD, 3600 rpm Max, Polyurethane

Browning® 3111861 Double Sided Type L Synchronous Belt, 80 Teeth, 3/8 in Pitch, 30 in OAL, 1/2 in W, Neoprene

TB Wood's® sheaves are constructed of fine grain, high tensile cast iron, and have been carefully engineered to assure maximum performance over a long life span. Behind each sheave is one of the most extensive engineering design and testing programs in the industry. With the advent of higher V-belt ratings, TB Wood's® engineers instituted additional careful test programs to ensure that each Wood's sheave would be capable of safely and dependably delivering the increased performance which was required by the new ratings. TB Wood's® engineers, using a special strain gage test stand, subject sheaves to tension and compression stresses far in excess of those encountered in actual operation.

Browning® PB9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 107-115SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel

Browning® PD9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 115-203SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel

Browning® PG9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 215-307SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel

Browning® PH9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 307-315SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel

Browning® PB9200 High Performance Motor Mount Support, For Use With TorqTaper® Plus Size 107SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1, 3/16 x 3/32 Keyseat Speed Reducer, Steel

Browning® PD9200 High Performance Motor Mount Support, For Use With TorqTaper® Plus Size 203SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1, 1/4 x 1/8 Keyseat Speed Reducer, Steel

Browning® PE9200 High Performance Motor Mount Support, For Use With TorqTaper® Plus Size 207SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1, 3/8 x 3/16 Keyseat Speed Reducer, Steel

Browning® PG9200 High Performance Motor Mount Support, For Use With TorqTaper® Plus Size 307SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1, 1/2 x 1/4 Keyseat Speed Reducer, Steel

Browning® PH9200 High Base Motor Mount Support, For Use With TorqTaper® Plus 182T to 365T Motor Frame Helical Shaft Mount Speed Reducers, Steel

MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.

Browning® 1237676 Half Bushed Non-Lubricated Jaw Coupling, JS6 Coupling, 1/2 to 1-3/4 in Dia Bore, 2 in L Through Bore, 3 in Dia Hub, Steel

Browning® 1237684 Half Bushed Non-Lubricated Jaw Coupling, JS7 Coupling, 3/4 to 2-11/16 in Dia Bore, 2.561 in L Through Bore, 4-1/8 in Dia Hub, Steel

Browning® 1237692 Half Bushed Non-Lubricated Jaw Coupling, JS9 Coupling, 1-1/8 to 3-3/4 in Dia Bore, 2-15/16 in L Through Bore, 5-3/8 in Dia Hub, Steel

Morse® XF9000 1-Piece Horizontal Standard Base Kit, For Use With Raider® Plus Styles UT, UB, QT, CT, CB, CRT, UHMT, UHMB, QHMT, QHMB, CHMT, CHMB, Size 2.37 in Center Distance Worm Gear Reducer, Cast Iron

Morse® XH9000 1-Piece Horizontal Standard Base Kit, For Use With Raider® Plus Styles UT, UB, QT, QB, CT, CB, CRT, UHMT, UHMB, QHMT, QHMB, CHMT, CHMB, Size 3 in Center Distance Worm Gear Reducer, Cast Iron

Morse® XJ9000 Bolt-On Horizontal Standard Base Kit, Bolt-On Horizontal Standard, For Use With Raider® Plus 3-3/4 in Worm Gear Reducer

Morse® XL9000 Bolt-On Horizontal Standard Base Kit, Bolt-On Horizontal Standard, For Use With Raider® Plus 5.16 in Worm Gear Reducer

Morse® XI9000 1-Piece Horizontal Standard Base Kit, For Use With Raider® Plus Styles UT, UB, QT, QB, CT, CB, CRT, UHMT, UHMB, QHMT, QHMB, CHMT, CHMB, Size 3-1/4 in Center Distance Worm Gear Reducer, Cast Iron

System Plast™ VG-018-01 018 Heavy Duty Rail Clip

System Plast™ VG-018-02 018 Heavy Duty Rail Clip

Browning® PG9402 0 Auxiliary Cooling Fan Kit, For Use With Size 307SMTP/SMFP 5:1, 9:1, 15:1, 25:1 or 35:1 Ratio Shaft Mount Reducer