RectorSeal
RectorSeal® 88312 Nickel-Safe Ice Machine Cleaner, 16 oz Bottle, Liquid
Nickel-Safe Ice Machine Cleaner is formulated as the safest product for nickel-plated evaporators. It assures clean cold taste-free ice by stripping ice machines of scale, muck and slime. In cube or flake ice, impurities cause opacity, bad taste and foul odor.
RectorSeal® 82112 Pipe Repair Kit
RectorSeal® Pipe Repair Kit is a cost-effective pipe repair system. Stops leaks on all rigid pipes in a variety of applications. Knitted fiberglass cloth in polyurethane resin bonds to PVC, fiberglass, concrete and all metal pipes and hardens in minutes.
RectorSeal® 25552 Multi-Purpose Pipe Thread Sealant, 1/2 pt Can, Yellow
RectorSeal® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.
RectorSeal 1/2-PT TRU-BLUE THREAD SEALANT REC 31551
RectorSeal® 31551 Tru-Blu™ Vibration Resistant Pipe Thread Sealant, 8 oz Can, Blue
RectorSeal 1/2-PT T-PLUS-2 THREAD SEALANT REC 23551
RectorSeal® T Plus 2® is a non-hardening thread sealant containing PTFE plus synthetic fibers dispersed in an resinous base combined with inert mineral fillers provide maximum sealing performance.
RectorSeal 1-PT TRU-BLUE THREAD SEALANT REC 31431
RectorSeal® Tru-Blu™ is a fast drying, adhesive thread sealant. It is especially suited for high vibration environments such as refrigeration or compressor applications. It contains PTFE for better thread sealing and for lubrication to facilitate easy break-out. It is also great for use as a positive lock and seal on threaded fasteners.
Metacaulk® 66640 Intumescent Firestop Sealant, 10.3 oz Cartridge, Paste Form, Red, 1.25
Metacaulk® 1000 is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Metacaulk® 1000 is a water based, extremely intumescent, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, Metacaulk® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. Metacaulk® 1000 is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail. For large applications, it can be pumped directly from the pail. Metacaulk® 1000 systems are rated for 1, 2, 3 and 4 hours in accordance with the ASTM E814 (UL1479),UL 2079 and ULC-S115-95 test standards. Metacaulk® 1000 is protected in a wet stage as well as in a dry stage against mold growth with a combination of biocides.
Recently Viewed
The Grey Pneumatic 4028D [4028D Grey Pneumatic - Amazon.com] is a 1-inch drive, 7/8-inch, 6-point deep-length impact socket. Forged from high-quality chrome-molybdenum alloy steel, it is designed for high-torque applications and includes an internal large bore for maximum bolt clearance. Here are the exact specifications of the socket Drive Size: 1 inch Socket Size: 7/8 inch Overall Length: 3.54 inches Hex Depth: 0.87 inches Weight: Approx. 1.79 to 3 lbs
AI Mode Conversation: GREY PNEUMATIC 3133MYou said: GREY PNEUMATIC 3133MThe Grey Pneumatic 3133M is a 3/4-inch drive x 33mm standard length, 12-point impact socket. It is engineered from high-grade chrome-molybdenum alloy steel and designed specifically for high-torque applications with impact wrenches or ratchets. 🛠Key Specifications Drive Size: 3/4"Socket Size: 33 mm Output Type: 12-PointLength: Standard (56 mm total length) Material: Chrome-Molybdenum Steel with a black oxide finish Dimensions: 44 mm drive end diameter, 51 mm socket end diameter, 22 mm hex depth Weight: 1.07 lbs Warranty: Covered by Grey Pneumatic's lifetime warranty
1/2"-DR QUICK RELEASE RATCHE - ALL12800 >
BUNDLE
MAIN PRODUCT
$11.73
ADDONS
$25.97
Total Bundle Price
$47.14
$37.70
Save: $9.43 (20% Off)
Add bundle to bag
Description
The Grey Pneumatic 1/2" Drive x 33mm Standard - 12 Point Socket (2133M) is designed for both professional and DIY applications. Crafted from high-quality chrome-molybdenum steel, this impact socket is built to provide exceptional durability and strength for demanding tasks.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from high-quality chrome-molybdenum steel for long-lasting performance.
12-Point Design: Provides a secure grip on fasteners and reduces the risk of rounding off bolts.
SPECIFICATIONS:
Drive: 1/2"
Size: 33mm
Point Type: 12-point
Length: Standard
Material: Chrome-molybdenum steel
3016D Grey Pneumatic 1/2″ x 3/4″ Dr. Deep Impact Socket
The Grey Pneumatic 1/2" Drive x 11/16" Deep Universal Socket (2022UD) is a high-performance tool designed for professional and industrial applications. Crafted from durable chrome-molybdenum steel, this socket is built to withstand the rigors of demanding tasks.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from high-quality chrome-molybdenum steel for long-lasting performance.
Impact-Resistant: Designed to handle the high torque of impact tools.
Deep Socket Design: Provides ample reach for difficult-to-access fasteners.
SPECIFICATIONS:
Drive: 1/2"
Socket Size: 11/16"
Material: Chrome-molybdenum steel
