Milwaukee Tool

This high-efficiency washable HEPA filter is excellent for fine dust suction and does not need to be changed between wet and dry applications. For use with Milwaukee® vacuums (0780-20) and (0880-20).

#2 PHILLIPSX120-MM HEX INSERT BIT-MWK48301521 >

#2 PHILLIPS 1/4" HEX BIT-MWK48301520 >

#2 RED SHANK PHILLIPS BITS-MWK48321040 >

Featuring an anti-peel handle design, hardened tips & forged shanks the Milwaukee® cushion grip screwdrivers provide professional grade solutions and durability to the user. The tactile identification, a new-to-world innovation allows users to accurately select the correct driver without looking. The wrench-ready bolster and precision knurling offers users the features needed to increase efficiency and effectiveness.

#3 PHILLIPS SCREW-SHOOTER BITS-MWK48321070 >

Milwaukee® 23-66-2190 Switch, For Use With 6805 Serial 709C 16 AWG Shear

#5540 SANDER/POLISHER PAD-MWK49362500 >

6230 BANDSAW FRONT HANDLE-MWK31440330 >

The 49-22-8108 extension kit is used with Milwaukee's 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage 18 in. on each end making the overall roller material carriage 8 ft. in length.

Milwaukee® 23-66-1253 Speed Control Switch, For Use With 6850 18 AWG Swivel Head Shear

This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.

Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.

1-1/2" DIAMOND CONCRETE CORE BITS-MWK48161507 >

Use for starting a 1-1/4 in. hole drill to a depth of approximately 1/4 in., stop hammer, remove guide plate and center pin. Place core bit back into the grooved area and resume drilling to required depth of hole. Adds bit stability and reduces bit walk.

For less abusive environments where metal attachments are not required, this general purpose cleaning kit includes plastic attachments. The kit includes: 49-90-1865 chromed metal 2-piece floor wand, 49-90-1770 plastic crevice tool, 49-90-1775 6 in plastic utility nozzle, 49-90-1845 plastic 14 in squeegee insert, 49-90-1850 plastic 14 in carpet insert, 49-90-1840 plastic master floor tool, 49-90-1860 plastic round dust brush, 49-90-1855 plastic 14 in brush insert. Fits 1-1/2 in ID Hoses. All inserts snap lock into master floor tool.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

The most hand-held power available in a specialty drill. Part of Milwaukee® super hole Shooter line, the 1-1/4 in large drill delivers versatile portable power for the toughest drilling and auger applications. The drill is furnished with a powerful Milwaukee® built motor and a #3 internal Morse taper socket. Poly chrome alloy steel gears produce high torque with minimum wear. You will get quiet performance from the heat treated, helical cut gears. The extra long switch handle and pipe handle provide maximum leverage and added control.

Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 375 and 750 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.

This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.