Milwaukee Tool
The M18â„¢ REDLITHIUMâ„¢ HIGH DEMANDâ„¢ 9.0 battery pack delivers up to 5X more run-time, 35% more power, and runs 60% cooler than standard 18 V lithium-ion batteries. The battery is best optimized for high draw products and sustained run-time applications, and it provides the next, large step towards full corded replacement when paired with the M18 system of solutions. It maintains full power and runs substantially cooler through heavy applications, allowing users to push their cordless tools harder and longer than ever before. The M18â„¢ REDLITHIUMâ„¢ HIGH DEMANDâ„¢ 9.0 battery is fully compatible with 100+ M18â„¢ tools.
BEARINGS-MWK02041201>
Milwaukee® 48-95-1500 Heavy Duty Drill Extension, 2 in Drill, 9 in L
Where quick insert bit changes are necessary, just pop them in/ pull them out with this snap ring and magnetic retention system. No need to unscrew the cap as with the 48-32-3025 bit holder. Three inches in length. For use on stainless steel surfaces. Fits any power or cordless screwdriver.
Where quick insert bit changes are necessary, just pop them in/ pull them out with this snap ring and magnetic retention system. No need to unscrew the cap as with the 48-32-3025 bit holder. Three inches in length. Fits any power or cordless screwdriver.
BLADE CLAMP SCREWS-MWK06832960 >
BLADE HOUSINGS-MWK22560050 >
Milwaukee® 31-52-0032 Blade Release Lever, For Use With 6225 Serial 457H 2-Speed Band Saw
Milwaukee® 22-20-0691 Left Brush Holder, For Use With 6880 Serial 630B 10 AWG, 6890-2 Serial 734A 16 AWG Nibbler
Milwaukee® 22-22-1560 Carbon Brush Assembly, For Use With 6148-33/6140-33 Serial B70A 4-1/2 in Angle Grinder with Slide Switch
Milwaukee® 22-18-0040 Carbon Brush Assembly, For Use With 9075-20 Serial 239D 3/4 in D.I. Impact Wrench, 9070-20 1/2 in D.I. Impact Wrench
Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt logic ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The bulldog version is ideal for tough cuts.
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.
CHAIN SPROCKET KIT-MWK14461175 >
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
The M12â„¢ compact charger and power source provides convenient, on-the-go charging for all M12â„¢ batteries both on and off the jobsite. Using the included jobsite tough micro-USB cable and 2.1A wall plug, the compact charger expands the portability of all M12â„¢ products. When not near an outlet, the compact charger is compatible with any USB output, including in-vehicle USB ports. Delivering additional functionality, the M12â„¢ compact charger and power source combines with any M12â„¢ battery to provide fast, portable charging for electronic devices. It can also be used to power all models of M12â„¢ heated gear for increased functionality. Designed to maximize the versatility of the M12â„¢ system, the multi-function M12â„¢ compact charger and power source provides convenient portable charging for batteries and devices.
18-V/28-VOLT CORDLESS BATTERY CHARGERS-MWK48592818 >
CHROME PLATED BRASS SPRAYERS-MWSA2000>
Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials.
Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by Milwaukee® 5 year warranty the 2682-22 comes equipped with (2) M18™ XC high capacity REDLITHIUM™ battery packs, 30T 5-3/8 in metal TECH™ carbide tipped metal saw blade, blade wrench, 1 hr charger and contractor bag.
Milwaukee® close quarters tubing cutters are optimized for tough cuts in tight spaces. The compact design allows access to the tightest spaces. Chrome rollers deliver best in class rust protection while integrated weep holes allow water to drain from the tool. Directional grip allows better handling and quick identification of swing direction for easy use. Includes 1/2 in., 3/4 in., and 1 in. cutters and a storage case.
Get maximum performance from your Milwaukee® Selfeed drill bits in soft woods and plywood with the coarse thread feed screw. The 1/4 in. replacement feed screw is designed for Selfeed bits sized 1 in. to 2-9/16 in..use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee® 2997-22J M18™ Fuel 2-Tool Power Tool Combination Kit, Tools: Hammer Drill Driver/Impact Driver, 18 VDC
Recently Viewed
NIBCO® K058050 4807-2 DWV Street Bend, 1-1/2 in Nominal, Spigot x Hub End Style, PVC, Domestic
The PVC DWV 90-degree street elbow features a spigot x hub connection and is used to change the direction of flow. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
7/8" -TOP WIDTH VARIABLE SPEED BELT O.L. 30.7"-PIX1422V300 >
Irwin® Hanson® 80242 Tap and Drill Bit Set, 2 Pieces, 1/2-13 Tap Thread, 27/64 in Drill, UNC Thread, Spiral Flute Tap, Plug Tap Chamfer
A convenient HCS tap and HSS drill bit combo, the Hanson 1/2 in. – 13 NC Tap and 27/64 in. Drill Bit Set is perfect for general purpose threading. You’ll get fast, precise drilling with the high-speed steel drill bit and the self-aligning taps are ideal for through holes and irregular surfaces. Set includes 1/2 in. – 13 NC Tap and 27/64 in. drill bit.
KLDR fuses are time delay fuses designed to protect control transformers, solenoids and similar inductive components with high magnetizing currents during the first half-cycle. they provide excellent protection of motor branch circuits containing IEC or NEMA rated motor controllers or contactors.
1-7/8" -ID JAW COUPLING HALVES-BRWL150X17/8 >
3/4" -ID SPHERICAL OD INSERT BEARING-IBISA20412 >
