Milwaukee Tool
Milwaukee® 48-62-4094 Clay Spade Chisel, SDS-Max Shank, 4-1/4 in W Blade, 16 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Clay spades are designed to dig into clay, hard packed gravel, and dirt. Do not use this tool on concrete or asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4091 Ground Rod Driver, For Use With SDS Max® 5315-21 Rotary Hammer, 5446-21 and 5339-21 Demolition Hammer, 9-3/4 in OAL, Slotted, 18 mm Round Shank, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 collared hex with notch). The Milwaukee 48-62-4091 is a 9-3/4 in. SDS Max demo ground rod driver. This demolition steel hammer accessory is ideally used with Milwaukee SDS Max demolition hammer 5446-21 and 5339 - 21. made from forged high grade steel, this hammer iron is used by utility companies to bury grounding rods in the soil. Internal diameter of the ground rod driver and capacity of the hammer determine the size of ground rod able to be installed.
Milwaukee® 48-62-4087 Scaling Chisel, 18 mm SDS-Max Shank, 3 in W Blade, 12 in OAL
The MILWAUKEE® SDS MAX SLEDGE™ Chisels are Milwaukee's Longest Lasting, Most Productive family of chisels. The SDS MAX SLEDGE™ 3” Scaling Chisel is forged with high grade steel to deliver maximum durability and reduced wear over the life of the chisel. This chisel is engineered with reinforced edges to stay sharper longer. Designed with a wide tip optimized for larger surface areas, this chisel is ideal for removing concrete, mortar, rust, cutting troughs and asphalt. No re-sharpening or re-hardening is necessary, reducing downtime. This MILWAUKEE® SDS MAX SLEDGE™ 3" Scaling Chisel is designed for use with SDS MAX rotary hammers
Milwaukee® 48-62-4085 Scaling Chisel, 18 mm SDS-Max Shank, 2 in W Blade, 12 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed to clean concrete, scale, rust and cut troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4081 Flat Chisel, 18 mm SDS-Max Shank, 1 in W Blade, 16 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4079 Flat Chisel, 18 mm SDS-Max Shank, 1 in W Blade, 11 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4077 Bull Point Chisel, 18 mm SDS-Max Shank, 18 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for starting holes in concrete slabs, general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4066 Asphalt Cutter, For Use With SDS Max® 5315-21 Rotary Hammer, 5 in W Head, 16-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4065 Bushing Tool, For Use With SDS Max® 5315-21 Rotary Hammer, 1-3/4 in W Head, 10-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Bushing tools are ideal for leveling concrete surfaces and removing excess concrete during finishing work. Additional, bushing tools can be used to roughen a smooth concrete to prepare the surface for additional concrete or a coating. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4045 Ground Rod Driver, For Use With Demolition Hammers, 3 in W Head, 15-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch, 3 in D Socket, 0.906 in ID, 5/8 in and 3/4 in Dia Rod, 1 in Hole
Drives soft ground rods. Socket depth - 3 in., inner diameter - .906. rod diameter 5/8 in. and 3/4 in., length 15-1/2 in.
Milwaukee® 48-62-4030 Clay Spade, For Use With Demolition Hammers, 5-1/2 in W Head, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-4020 Asphalt Cutter, For Use With Demolition Hammers, 5 in W Head, 17-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Features: asphalt cutter. 1-1/8 in. collared hex shank with notch. 5 in. width x 17-1/2 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-4010 Chisel, For Use With Demolition Hammers, 3 in W Head, 20-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cleaning concrete, scale, rust, cutting troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4005 Narrow Chisel, 1-1/8 in Hex Shank, 20-1/2 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-4000 Moil Point, For Use With Demolition Hammers, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. Features: moil point. 1-1/8 in. collared hex shank with notch. 20 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-3085 Bushing Tool, For Use With 5337-21 Demolition Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee® 48-62-3070 Ground Rod Driver, For Use With 5337-21 Demolition Hammer, 9-3/4 in OAL, 3/4 in Hex, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Milwaukee Tool is an industry leading manufacturer of professional, heavy duty power tools and accessories. Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 C. The Milwaukee 48-62-3070 is a 9-3/4 in. x 3/4 in. Hex ground rod.
Milwaukee® 48-62-3030 Scaling Chisel, 3/4 in Hex Shank, 3 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing weld spatter, scale and concrete form overflow and seepage. One per package.
Milwaukee® 48-62-3015 Flat Chisel, 3/4 in Hex Shank, 1 in W Blade, 18 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-3010 Flat Chisel, 3/4 in Hex Shank, 1 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-3005 Bull Point Chisel, 3/4 in Hex Shank, 18 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package. Features: bull point. 3/4 in. hex shank. 18 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-3000 Bull Point Chisel, 3/4 in Hex Shank, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package.
Milwaukee® 48-62-2095 Clay Spade, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 4-1/2 in W Head, 16-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-2070 Bushing Tool, For Use With 5345-21 Rotary Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Recently Viewed
16-MM 3/8"-DRIVE 6-POINT ELIMINATOR SOCKET
5.5-MM 6-PT 1/4" - DRIVE STANDARD LENGTH SOCKET-ARS37083 >
PIX B-159 IS A CLASSICAL V-BELT, 162" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXB159 >
Greenlee® 00504 Short Set Screw Clamp Cable Pulling Grip, 3/8 in Cable, 3250 lb Load, Galvanized Steel
Greenlee® 504 Short Set Screw Clamp Cable Pulling Grip, 3/8 in, 3250 lb, Galvanized Steel
3/4" SOCKETS - ALL11514 >
12-MM 6-PT 3/8" -DRIVE STANDARD LENGTH SOCKET
